Find the right part faster
Multiple models matched. Select your model to confirm fit.

Bake element assembly with support brackets

The Frigidaire Bake Element is a high quality replacement part for electric ovens on ranges. It is located at the bottom of the oven and supplies heat for baking. It replaces several part numbers

Oven bake element. If the oven won't heat, the bake element may have burned out. Often, if the bake element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters.

8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns

Oven bake heating element for lower oven. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.

Dual radiant surface element, 9 inches/6 inches, 3000 watts

8 Inch electric coil surface element with looped terminals, 4 turns

Oven bake heating element

6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn, black center cap

The Whirlpool Bake Element is a high quality part located at the bottom of the oven that supplies heat for baking. It is 16-5/8 inches wide X 15-3/4 inches deep and is for electric ovens on ranges with a rating of 2600Watt and 240Volt. It replaces multiple part numbers. Use caution when servicing.

Range/stove surface element (6-inch). If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

Oven bake element with push-on terminal ends. It is not unusual for a bake element to short out and arc in one spot. If this occurs, disconnect the power to the stove until the element has been replaced.

Surface coil element replacement kit, 2 eight inch elements, 2 six inch elements, four receptacles and related hardware. If the terminal blocks and surface elements on your stove top are in bad shape this is the perfect kit to refresh the appliance.

The Whirlpool Bake Element is a high quality part located at the bottom of the oven that supplies heat for baking. It measures 15-5/8 inches Length by 15 inches Width and is for electric ovens with a rating of 2100 Watt and 240 Volt. It replaces multiple part numbers.

Bake element assembly
You can often determine that an electric oven bake or broil heating element has burned out by inspecting the element for any breaks or blistering. You can also use a multimeter to test the element for continuity – a continuous electrical path present in the part. If the element tests negative for continuity, you know for sure it will need to be replaced. Repair Clinic carries replacement bake and broil elements, as well as cooktop radiant elements, that fit every major brand of electric range, including those manufactured by Amana, Electrolux, GE, Hotpoint, KitchenAid, LG, and more. To find the right components for your range, enter the full model number of the appliance in our website’s search bar. You can then select “Heating Element” from the part category filter followed by the relevant part title to identify the specific part you need. Not sure which part is the right one for your model? No problem. Give our Customer Service Team a call at 1-800-269-2609; a representative will be happy to help.
Shipping you the right part fast is only half the story at Repair Clinic. The other half is the exhaustive repair help content you’ll find here on our site. We give you free access to thousands of “how to” videos, articles, and model-specific schematics to guide you though fixing home appliances, outdoor power equipment, and heating and cooling products. With support from Repair Clinic, the story always ends happily with the repair completed and money saved.