Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Freezer Replace Door Gasket #2159080
Whirlpool Refrigerator Freezer Replace Door Gasket #2159080
Skill Level
Total Parts Cost
$156.85Estimated Savings
$112.5001:21
- Description
This video provides step-by-step instructions for replacing the freezer door gasket on Whirlpool refrigerators. The most common reason for replacing the freezer door gasket is when it is torn or defective, causing warm air to get into the refrigerator and cause the evaporator coils to ice over.
All of the information in this door gasket replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Crosley, Inglis, Estate
Tools used: putty knife, hair dryer
All of the information in this door gasket replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Crosley, Inglis, Estate
Tools used: putty knife, hair dryer
Step By Step Instructions
1
To replace the freezer door gasket on your refrigerator first pull the old door gasket out from behind the door liner and remove it from the door.
2
Now use a putty knife to remove any excess foam from behind the liner – be careful not to insert the putty knife too far behind the liner.
3
You’re now ready to install the new door gasket.
4
Starting at the top, insert the lip of the gasket behind the door liner and snap it into place.
5
Continue along the sides and bottom until the gasket is fully installed.
6
Check to see if the gasket sets flush against the cabinet frame.
7
If not, you can use a hair dryer set on low to make the gasket more pliable so it will seal properly.
Description
This video provides step-by-step instructions for replacing the freezer door gasket on Whirlpool refrigerators. The most common reason for replacing the freezer door gasket is when it is torn or defective, causing warm air to get into the refrigerator and cause the evaporator coils to ice over.
All of the information in this door gasket replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Crosley, Inglis, Estate
Tools used: putty knife, hair dryer
All of the information in this door gasket replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Crosley, Inglis, Estate
Tools used: putty knife, hair dryer
Step-By-Step Instructions
1
To replace the freezer door gasket on your refrigerator first pull the old door gasket out from behind the door liner and remove it from the door.
2
Now use a putty knife to remove any excess foam from behind the liner – be careful not to insert the putty knife too far behind the liner.
3
You’re now ready to install the new door gasket.
4
Starting at the top, insert the lip of the gasket behind the door liner and snap it into place.
5
Continue along the sides and bottom until the gasket is fully installed.
6
Check to see if the gasket sets flush against the cabinet frame.
7
If not, you can use a hair dryer set on low to make the gasket more pliable so it will seal properly.
Applicable Product Model
Parts Needed
Door Gasket
$156.85
Total$0.00
Related Articles & Videos
03:20
How This Part Works
Refrigerator/Freezer Door Gasket - How it Works & Installation Tips
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com