Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Pressure Washer Gas Tank Replacement #06175-Z8B-800
Honda Pressure Washer Gas Tank Replacement #06175-Z8B-800
Skill Level
Total Parts Cost
$84.29Estimated Savings
$112.5003:20
- Description
This video provides step-by-step instructions for replacing the gas tank on Honda small engines, commonly found on Honda, Toro, Lawn Boy, MTD, and Cub Cadet lawn mowers. The most common reason for replacing the gas tank is when it is cracked or damaged, causing the engine to leak gas.
All of the information in this gas tank replacement video is applicable to the following brands: Honda, Toro, Lawn Boy, MTD, Cub Cadet
Tools used: 10mm socket and socket wrench, pliers, channel lock pliers, flat-head screwdriver
All of the information in this gas tank replacement video is applicable to the following brands: Honda, Toro, Lawn Boy, MTD, Cub Cadet
Tools used: 10mm socket and socket wrench, pliers, channel lock pliers, flat-head screwdriver
Step By Step Instructions
1
Before you replace the fuel tank first make sure the engine has cooled remove the wire and boot from the spark plug and perform the procedure with no fuel left in the tank.
2
Now remove the nuts securing the recoil starter to the engine. and pull the starter off.
3
Use pliers to remove the retaining clamp to release the fuel line from the tank – be prepared for some fuel to spill.
4
You can now remove the engine cover and tank.
5
Remove the gas cap and retainer.
6
Unthread the retaining nut.
7
Pull out the fuel level indicator.
8
Pry the retaining clip off and pull the old tank free of the engine cover.
9
Prepare the new fuel tank for installation by transferring the rubber mounts from the old tank to the new one.
10
Now align the tabs on the tank with the notches in the engine cover and fully position the new tank.
11
Secure it with the retaining clip.
12
Make sure the gasket is in place then thread on the retaining nut.
13
Insert the fuel level indicator into the fill spout.
14
Slide on the cap retainer then thread on the cap.
15
Replace the engine cover.
16
Connect the fuel line to the new tank and secure it with the retaining clamp.
17
Reinstall the recoil starter by aligning it on the mounting posts then thread the nuts to secure.
18
Reattach the wire and boot to the spark plug.
19
Fill the tank with fuel and confirm that the engine runs properly.
Description
This video provides step-by-step instructions for replacing the gas tank on Honda small engines, commonly found on Honda, Toro, Lawn Boy, MTD, and Cub Cadet lawn mowers. The most common reason for replacing the gas tank is when it is cracked or damaged, causing the engine to leak gas.
All of the information in this gas tank replacement video is applicable to the following brands: Honda, Toro, Lawn Boy, MTD, Cub Cadet
Tools used: 10mm socket and socket wrench, pliers, channel lock pliers, flat-head screwdriver
All of the information in this gas tank replacement video is applicable to the following brands: Honda, Toro, Lawn Boy, MTD, Cub Cadet
Tools used: 10mm socket and socket wrench, pliers, channel lock pliers, flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the fuel tank first make sure the engine has cooled remove the wire and boot from the spark plug and perform the procedure with no fuel left in the tank.
2
Now remove the nuts securing the recoil starter to the engine. and pull the starter off.
3
Use pliers to remove the retaining clamp to release the fuel line from the tank – be prepared for some fuel to spill.
4
You can now remove the engine cover and tank.
5
Remove the gas cap and retainer.
6
Unthread the retaining nut.
7
Pull out the fuel level indicator.
8
Pry the retaining clip off and pull the old tank free of the engine cover.
9
Prepare the new fuel tank for installation by transferring the rubber mounts from the old tank to the new one.
10
Now align the tabs on the tank with the notches in the engine cover and fully position the new tank.
11
Secure it with the retaining clip.
12
Make sure the gasket is in place then thread on the retaining nut.
13
Insert the fuel level indicator into the fill spout.
14
Slide on the cap retainer then thread on the cap.
15
Replace the engine cover.
16
Connect the fuel line to the new tank and secure it with the retaining clamp.
17
Reinstall the recoil starter by aligning it on the mounting posts then thread the nuts to secure.
18
Reattach the wire and boot to the spark plug.
19
Fill the tank with fuel and confirm that the engine runs properly.
Applicable Product Model
Parts Needed
Fuel Tank
$84.29
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com