Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Front-Load Washer Tub to Pump Hose #131784700
Frigidaire Front-Load Washer Tub to Pump Hose #131784700
Skill Level
Total Parts Cost
$77.77Estimated Savings
$112.5002:47
- Description
This video provides step-by-step repair instructions for replacing the tub to pump hose on a Frigidaire front-loading washing machine. The most common reasons for replacing the pump hose are when the washer is leaking, not circulating water properly, or not draining.
All of the information for this tub to pump hose replacement video is applicable to the following brands:
Frigidaire, Kenmore, Gibson, Crosley, Westinghouse, Electrolux
Tools needed: multi-screwdriver, Phillips head bit, pliers
All of the information for this tub to pump hose replacement video is applicable to the following brands:
Frigidaire, Kenmore, Gibson, Crosley, Westinghouse, Electrolux
Tools needed: multi-screwdriver, Phillips head bit, pliers
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the tub-to-pump hose on your washer first remove the screws securing the lower front access panel.
3
Pull the panel off.
4
Next, use pliers to release the retaining clamps securing the tub-to-pump hose to the air chamber and the drain pump
5
Remove the hose ports and be prepared for some water to spill out.
6
Now loosen the band clamp and pull the old hose off of the tub.
7
Prepare the new tub-to-pump hose for installation by transferring the strainer from the old hose to the new one.
8
Transfer the drain port clamp and band clamp as well.
9
Now position the large port on the tub and tighten the band clamp to secure.
10
Attach the new hose to the air chamber and secure it with the retaining clamp.
11
Connect the hose to the drain pump in the same manner.
12
Replace the access panel by aligning the holes with the pins on the bottom of the front panel then replace the screws.
13
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Description
This video provides step-by-step repair instructions for replacing the tub to pump hose on a Frigidaire front-loading washing machine. The most common reasons for replacing the pump hose are when the washer is leaking, not circulating water properly, or not draining.
All of the information for this tub to pump hose replacement video is applicable to the following brands:
Frigidaire, Kenmore, Gibson, Crosley, Westinghouse, Electrolux
Tools needed: multi-screwdriver, Phillips head bit, pliers
All of the information for this tub to pump hose replacement video is applicable to the following brands:
Frigidaire, Kenmore, Gibson, Crosley, Westinghouse, Electrolux
Tools needed: multi-screwdriver, Phillips head bit, pliers
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the tub-to-pump hose on your washer first remove the screws securing the lower front access panel.
3
Pull the panel off.
4
Next, use pliers to release the retaining clamps securing the tub-to-pump hose to the air chamber and the drain pump
5
Remove the hose ports and be prepared for some water to spill out.
6
Now loosen the band clamp and pull the old hose off of the tub.
7
Prepare the new tub-to-pump hose for installation by transferring the strainer from the old hose to the new one.
8
Transfer the drain port clamp and band clamp as well.
9
Now position the large port on the tub and tighten the band clamp to secure.
10
Attach the new hose to the air chamber and secure it with the retaining clamp.
11
Connect the hose to the drain pump in the same manner.
12
Replace the access panel by aligning the holes with the pins on the bottom of the front panel then replace the screws.
13
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com