Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairYork Central Air A/C Condenser Fan Motor #S1-02435328000
York Central Air A/C Condenser Fan Motor #S1-02435328000
Skill Level
Total Parts Cost
$219.86Estimated Savings
$112.5004:57
- Description
This video provides step-by-step instructions for replacing the condenser fan motor on York central air conditioning units. The most common reason for replacing the condenser fan motor are when the condenser fan motor does not run, the air conditioner is noisy, or the air conditioner does not run at all.
All of the information in this condenser fan motor replacement video is applicable to the following brands: York
Tools: multi-screwdriver, 5/16” socket, cutters, wrench, cutters, wrench, flat-head bit, 7/16” socket
All of the information in this condenser fan motor replacement video is applicable to the following brands: York
Tools: multi-screwdriver, 5/16” socket, cutters, wrench, cutters, wrench, flat-head bit, 7/16” socket
Step By Step Instructions
1
To replace the fan motor in your central air condensing unit first shut off the power to the unit.
2
You can do this by removing the fuses from the disconnect box or switching off the circuit breaker.
3
Now use a 5/16th inch socket to unthread the screws securing the access cover and remove the cover.
4
Cut the zip tie securing the wire bundle and disconnect the wire harness.
5
Now remove the mounting screws securing the fan guard.
6
Lift up the guard and fan motor assembly, detach the wire guide from the cover and flip the assembly over.
7
Undo the twist retainer inside the condensing unit pull the wires free and remove the fan guard and fan motor assembly.
8
Use a wrench to loosen the set screw and pull the fan blade off of the motor shaft.
9
Remove the wire guide.
10
Now use a 7/16th inch socket to remove the mounting nuts to release the old fan motor from the fan guard.
11
You’re now ready to install the new fan motor.
12
Position the new motor on the fan guard and replace the mounting nuts to secure.
13
Align the new motor wires in the wire guide and snap the guide shut.
14
Position the fan blade on the end of the motor shaft then tighten the set screw to secure.
15
Return the assembly to the condensing unit and insert the wire harness through the hole in the top cover.
16
Route the wires through the hole in the side panel.
17
Secure the wires in the twist retainer.
18
Reposition the fan guard and fan motor assembly by first inserting the wire guide into the hole in the cover.
19
Then fully align the fan guard on the cover and secure it with the mounting screws.
20
Now connect the wire harness.
21
Bundle the wires together and use a zip tie to secure them.
22
Realign the access cover and replace the screws to secure.
23
With the repair completed, restore power to the condensing unit and your central air system should be ready for use.
Description
This video provides step-by-step instructions for replacing the condenser fan motor on York central air conditioning units. The most common reason for replacing the condenser fan motor are when the condenser fan motor does not run, the air conditioner is noisy, or the air conditioner does not run at all.
All of the information in this condenser fan motor replacement video is applicable to the following brands: York
Tools: multi-screwdriver, 5/16” socket, cutters, wrench, cutters, wrench, flat-head bit, 7/16” socket
All of the information in this condenser fan motor replacement video is applicable to the following brands: York
Tools: multi-screwdriver, 5/16” socket, cutters, wrench, cutters, wrench, flat-head bit, 7/16” socket
Step-By-Step Instructions
1
To replace the fan motor in your central air condensing unit first shut off the power to the unit.
2
You can do this by removing the fuses from the disconnect box or switching off the circuit breaker.
3
Now use a 5/16th inch socket to unthread the screws securing the access cover and remove the cover.
4
Cut the zip tie securing the wire bundle and disconnect the wire harness.
5
Now remove the mounting screws securing the fan guard.
6
Lift up the guard and fan motor assembly, detach the wire guide from the cover and flip the assembly over.
7
Undo the twist retainer inside the condensing unit pull the wires free and remove the fan guard and fan motor assembly.
8
Use a wrench to loosen the set screw and pull the fan blade off of the motor shaft.
9
Remove the wire guide.
10
Now use a 7/16th inch socket to remove the mounting nuts to release the old fan motor from the fan guard.
11
You’re now ready to install the new fan motor.
12
Position the new motor on the fan guard and replace the mounting nuts to secure.
13
Align the new motor wires in the wire guide and snap the guide shut.
14
Position the fan blade on the end of the motor shaft then tighten the set screw to secure.
15
Return the assembly to the condensing unit and insert the wire harness through the hole in the top cover.
16
Route the wires through the hole in the side panel.
17
Secure the wires in the twist retainer.
18
Reposition the fan guard and fan motor assembly by first inserting the wire guide into the hole in the cover.
19
Then fully align the fan guard on the cover and secure it with the mounting screws.
20
Now connect the wire harness.
21
Bundle the wires together and use a zip tie to secure them.
22
Realign the access cover and replace the screws to secure.
23
With the repair completed, restore power to the condensing unit and your central air system should be ready for use.
Applicable Product Model
Parts Needed
Condenser Fan Motor
$219.86
Recommended Tools and Accessories
Run Capacitor
$11.19
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com