Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairMantis Tiller Tine Replacement, Right #438RA
Mantis Tiller Tine Replacement, Right #438RA
Skill Level
Total Parts Cost
$62.86Estimated Savings
$112.5001:19
- Description
This video provides step-by-step instructions for replacing the right-hand tine on Mantis tillers. The most common reason for replacing the tine is if it is worn.
All of the information in this tine replacement video is applicable to the following brands: Mantis
Tools used: none
All of the information in this tine replacement video is applicable to the following brands: Mantis
Tools used: none
Step By Step Instructions
1
Before you replace the right tine assembly when in the cultivating position on the tiller make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Now tip the tiller forward so it rests on the fuel tank and tine guard.
4
Remove the retaining pin and carefully pull off the old tine assembly.
5
Install the new tine assembly by aligning it on the shaft.
6
Insert the retaining pin to secure and return the tiller to its upright position.
Description
This video provides step-by-step instructions for replacing the right-hand tine on Mantis tillers. The most common reason for replacing the tine is if it is worn.
All of the information in this tine replacement video is applicable to the following brands: Mantis
Tools used: none
All of the information in this tine replacement video is applicable to the following brands: Mantis
Tools used: none
Step-By-Step Instructions
1
Before you replace the right tine assembly when in the cultivating position on the tiller make sure the engine has cooled and the on-off switch is in the “off” position.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Now tip the tiller forward so it rests on the fuel tank and tine guard.
4
Remove the retaining pin and carefully pull off the old tine assembly.
5
Install the new tine assembly by aligning it on the shaft.
6
Insert the retaining pin to secure and return the tiller to its upright position.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com