Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Washer Push Indicator Replacement #134933900
Electrolux Washer Push Indicator Replacement #134933900
Skill Level
Total Parts Cost
$62.58Estimated Savings
$112.5003:56
- Description
This video provides step-by-step repair instructions for replacing the door push indicator on an Electrolux washing machine.
All of the information for this push indicator replacement video is applicable to the following brands:
Electrolux
Tools needed: Phillips head screwdriver, #2 square bit
All of the information for this push indicator replacement video is applicable to the following brands:
Electrolux
Tools needed: Phillips head screwdriver, #2 square bit
Step By Step Instructions
1
Before you replace the outer door push indicator in your washer…
2
…be sure to unplug the power cord.
3
Open the washer door and support it…
4
…as you use a number two square bit or a phillips-head screwdriver to unthread the four screws securing the door to the hinge.
5
Detach the door…
6
…and set it on a towel or blanket.
7
Now unthread the mounting screws securing the door strike.
8
Remove the strike.
9
Next, remove the two screws securing the door strike cover.
10
Use a small flat-head screwdriver to help pry the cover off.
11
Now unthread the screws securing the top and bottom glass supports.
12
Pry the supports off.
13
Lift out the inner door glass.
14
You can now detach the old push indicator if still intact.
15
Install the new push indicator…
16
…by snapping it into place in the outer door window assembly.
17
Reinstall the inner door glass by aligning the indicator tabs with the door frame.
18
Replace both glass supports…
19
…and thread the screws to secure.
20
Realign the door strike cover on the door frame and snap it into place.
21
Secure it with the screws.
22
Realign the door strike then thread the mounting screws to secure.
23
Realign the washer door on the hinge…
24
…then thread and tighten the screws.
25
With the repair completed…
26
…plug the power cord back in…
27
…and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door push indicator on an Electrolux washing machine.
All of the information for this push indicator replacement video is applicable to the following brands:
Electrolux
Tools needed: Phillips head screwdriver, #2 square bit
All of the information for this push indicator replacement video is applicable to the following brands:
Electrolux
Tools needed: Phillips head screwdriver, #2 square bit
Step-By-Step Instructions
1
Before you replace the outer door push indicator in your washer…
2
…be sure to unplug the power cord.
3
Open the washer door and support it…
4
…as you use a number two square bit or a phillips-head screwdriver to unthread the four screws securing the door to the hinge.
5
Detach the door…
6
…and set it on a towel or blanket.
7
Now unthread the mounting screws securing the door strike.
8
Remove the strike.
9
Next, remove the two screws securing the door strike cover.
10
Use a small flat-head screwdriver to help pry the cover off.
11
Now unthread the screws securing the top and bottom glass supports.
12
Pry the supports off.
13
Lift out the inner door glass.
14
You can now detach the old push indicator if still intact.
15
Install the new push indicator…
16
…by snapping it into place in the outer door window assembly.
17
Reinstall the inner door glass by aligning the indicator tabs with the door frame.
18
Replace both glass supports…
19
…and thread the screws to secure.
20
Realign the door strike cover on the door frame and snap it into place.
21
Secure it with the screws.
22
Realign the door strike then thread the mounting screws to secure.
23
Realign the washer door on the hinge…
24
…then thread and tighten the screws.
25
With the repair completed…
26
…plug the power cord back in…
27
…and your washer should be ready for use.
Applicable Product Model
Recommended Tools and Accessories
Cleaner
$7.62
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com