Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Hedge Trimmer Won't Start? Ignition Coil #A411000210
Echo Hedge Trimmer Won't Start? Ignition Coil #A411000210
Skill Level
Total Parts Cost
$100.24Estimated Savings
$112.5004:06
- Description
This video provides step-by-step repair instructions for replacing the ignition coil on an Echo hedge trimmer. The most common reason for replacing the ignition coil is voltage not reaching the spark plug, causing the hedge trimmer to not start.
All of the information in this ignition coil replacement video is applicable to the following brands: Echo
Tools used: pliers, T-27 Torx bit
All of the information in this ignition coil replacement video is applicable to the following brands: Echo
Tools used: pliers, T-27 Torx bit
Step By Step Instructions
1
Before you replace the ignition coil in your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
To reduce the chance of injury, we recommend keeping the blade cover on for this procedure.
4
Use a t-27 torx bit to unthread the screws to release the upper half of the engine housing.
5
Depress the retaining tab to disconnect the ignition coil wire.
6
Make sure the flywheel magnets are rotated out of the way then unthread the mounting screws securing the ignition coil.
7
Remove the old coil.
8
Prepare the new ignition coil for installation by transferring the boot, the terminal and the insulator from the old coil to the new one or install new parts.
9
You can apply a small amount of liquid dish soap to the boot to make it easier to pull it off of the terminal wire.
10
Slide the insulator onto the new ignition coil wire.
11
Attach the terminal by using pliers to insert the hook into the wire.
12
Slide the boot onto the terminal.
13
Now align the new ignition coil on the engine and thread the mounting screws loosely.
14
Place a business card between the coil and flywheel rotate the flywheel so the magnets align with the coil then tighten the screws.
15
This will align the new coil the correct distance from the flywheel.
16
Connect the ignition coil wire.
17
Reposition the upper half of the engine housing.
18
Replace the screws to secure. The screws with the larger threads go in the bottom.
19
With the repair completed attach the wire and boot to the spark plug and your hedge trimmer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the ignition coil on an Echo hedge trimmer. The most common reason for replacing the ignition coil is voltage not reaching the spark plug, causing the hedge trimmer to not start.
All of the information in this ignition coil replacement video is applicable to the following brands: Echo
Tools used: pliers, T-27 Torx bit
All of the information in this ignition coil replacement video is applicable to the following brands: Echo
Tools used: pliers, T-27 Torx bit
Step-By-Step Instructions
1
Before you replace the ignition coil in your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
To reduce the chance of injury, we recommend keeping the blade cover on for this procedure.
4
Use a t-27 torx bit to unthread the screws to release the upper half of the engine housing.
5
Depress the retaining tab to disconnect the ignition coil wire.
6
Make sure the flywheel magnets are rotated out of the way then unthread the mounting screws securing the ignition coil.
7
Remove the old coil.
8
Prepare the new ignition coil for installation by transferring the boot, the terminal and the insulator from the old coil to the new one or install new parts.
9
You can apply a small amount of liquid dish soap to the boot to make it easier to pull it off of the terminal wire.
10
Slide the insulator onto the new ignition coil wire.
11
Attach the terminal by using pliers to insert the hook into the wire.
12
Slide the boot onto the terminal.
13
Now align the new ignition coil on the engine and thread the mounting screws loosely.
14
Place a business card between the coil and flywheel rotate the flywheel so the magnets align with the coil then tighten the screws.
15
This will align the new coil the correct distance from the flywheel.
16
Connect the ignition coil wire.
17
Reposition the upper half of the engine housing.
18
Replace the screws to secure. The screws with the larger threads go in the bottom.
19
With the repair completed attach the wire and boot to the spark plug and your hedge trimmer should be ready for use.
Applicable Product Model
Parts Needed
Ignition Coil
$100.24
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com