Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front-Load Washer Replace Door Hinge #WPW10208415
Whirlpool Front-Load Washer Replace Door Hinge #WPW10208415
Skill Level
Total Parts Cost
$90.36Estimated Savings
$112.5003:36
- Description
This video provides step-by-step repair instructions for replacing the door hinge on a Whirlpool washer. The most common reason for replacing the door hinge is if it is damaged or broken.
This door hinge replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: T-25 Torx bit, T-15 Torx bit
This door hinge replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: T-25 Torx bit, T-15 Torx bit
Step By Step Instructions
1
Before you replace the dryer door hinge be sure to unplug the power cord.
2
Before you replace the washer door hinge be sure to unplug the power cord.
3
Open the dryer door and use a t-25 torx bit to unthread the door hinge mounting screws.
4
Open the washer door and use a t-25 torx bit to unthread the screws securing the door hinge.
5
With the screws unthreaded, lift the door up to detach it from the front panel.
6
With the screws unthreaded, lift the door up to detach it from the front panel.
7
Use a phillips-head screwdriver to unthread the screws holding the inner and outer door panels together.
8
Using a t-15 torx bit, unthread the screws holding the inner and outer door panels together.
9
Separate the panels.
10
Separate the panels.
11
Use the t-25 torx bit to unthread the screws securing the hinge plate.
12
Use the t-15 torx bit to unthread the screws to release the door hinge cover plate.
13
Lift off the plate and detach the old hinge.
14
Remove the plate and detach the old door hinge.
15
Prepare the new door hinge for installation by sliding on the hinge pin caps.
16
Prepare the new door hinge for installation by sliding on the plastic hinge bearings.
17
Now align the hinge on the inner panel.
18
Now align the hinge on the inner panel.
19
Reposition the hinge cover plate then thread the screws to secure.
20
Reposition the hinge cover plate then thread the screws to secure.
21
Realign the inner and outer door panels and secure all of the screws.
22
Realign the inner and outer door panels and rethread the screws.
23
Insert the hinge tabs into the front panel slots.
24
Insert the hinge tabs into the front panel slots.
25
Rethread the screws to secure.
26
Rethread the screws to secure.
27
With the repair completed plug the power cord back in and your dryer should be ready for use.
28
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door hinge on a Whirlpool washer. The most common reason for replacing the door hinge is if it is damaged or broken.
This door hinge replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: T-25 Torx bit, T-15 Torx bit
This door hinge replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: T-25 Torx bit, T-15 Torx bit
Step-By-Step Instructions
1
Before you replace the dryer door hinge be sure to unplug the power cord.
2
Before you replace the washer door hinge be sure to unplug the power cord.
3
Open the dryer door and use a t-25 torx bit to unthread the door hinge mounting screws.
4
Open the washer door and use a t-25 torx bit to unthread the screws securing the door hinge.
5
With the screws unthreaded, lift the door up to detach it from the front panel.
6
With the screws unthreaded, lift the door up to detach it from the front panel.
7
Use a phillips-head screwdriver to unthread the screws holding the inner and outer door panels together.
8
Using a t-15 torx bit, unthread the screws holding the inner and outer door panels together.
9
Separate the panels.
10
Separate the panels.
11
Use the t-25 torx bit to unthread the screws securing the hinge plate.
12
Use the t-15 torx bit to unthread the screws to release the door hinge cover plate.
13
Lift off the plate and detach the old hinge.
14
Remove the plate and detach the old door hinge.
15
Prepare the new door hinge for installation by sliding on the hinge pin caps.
16
Prepare the new door hinge for installation by sliding on the plastic hinge bearings.
17
Now align the hinge on the inner panel.
18
Now align the hinge on the inner panel.
19
Reposition the hinge cover plate then thread the screws to secure.
20
Reposition the hinge cover plate then thread the screws to secure.
21
Realign the inner and outer door panels and secure all of the screws.
22
Realign the inner and outer door panels and rethread the screws.
23
Insert the hinge tabs into the front panel slots.
24
Insert the hinge tabs into the front panel slots.
25
Rethread the screws to secure.
26
Rethread the screws to secure.
27
With the repair completed plug the power cord back in and your dryer should be ready for use.
28
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Parts Needed
Door Hinge
$90.36
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com