Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front-Load Washer Replace Drain Pump #WPW10425238
Whirlpool Front-Load Washer Replace Drain Pump #WPW10425238
Skill Level
Total Parts Cost
$56.33Estimated Savings
$112.5003:34
- Description
This video provides step-by-step repair instructions for replacing the drain pump on a Whirlpool front-load washer. The most common reasons for replacing the drain pump are if the washer won’t drain, is leaking water, or is making a loud noise.
This drain pump replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, pliers, 5/16th inch socket
This drain pump replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, pliers, 5/16th inch socket
Step By Step Instructions
1
Before you replace the drain pump in your washer be sure to unplug the power cord.
2
Remove the four rear access panel plugs if intact.
3
Use a quarter-inch socket or nut driver to unthread the screws securing the rear access panel.
4
The top middle screw does not need to be completely unthreaded.
5
Slide the panel to the right to fully detach.
6
Disconnect the drain pump wire connecter.
7
Use pliers to release the clamp securing the drain hose to the pump and pull the hose off.
8
Use a 5/16th inch socket to unthread the drain pump mounting screws.
9
With the screws unthreaded, you can pull the old pump free.
10
Install the new drain pump by aligning the mounting tab with the slot on the tub as you position the inlet port.
11
Thread the mounting screws to secure.
12
Attach the drain hose and secure it with the clamp.
13
Connect the wire connecter to the new pump.
14
Realign the rear access panel on the top middle screw and slide the panel to the left.
15
Tighten the screw and rethread the remaining screws to secure the panel.
16
If you prefer, you can reinstall the panel plugs.
17
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drain pump on a Whirlpool front-load washer. The most common reasons for replacing the drain pump are if the washer won’t drain, is leaking water, or is making a loud noise.
This drain pump replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, pliers, 5/16th inch socket
This drain pump replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, pliers, 5/16th inch socket
Step-By-Step Instructions
1
Before you replace the drain pump in your washer be sure to unplug the power cord.
2
Remove the four rear access panel plugs if intact.
3
Use a quarter-inch socket or nut driver to unthread the screws securing the rear access panel.
4
The top middle screw does not need to be completely unthreaded.
5
Slide the panel to the right to fully detach.
6
Disconnect the drain pump wire connecter.
7
Use pliers to release the clamp securing the drain hose to the pump and pull the hose off.
8
Use a 5/16th inch socket to unthread the drain pump mounting screws.
9
With the screws unthreaded, you can pull the old pump free.
10
Install the new drain pump by aligning the mounting tab with the slot on the tub as you position the inlet port.
11
Thread the mounting screws to secure.
12
Attach the drain hose and secure it with the clamp.
13
Connect the wire connecter to the new pump.
14
Realign the rear access panel on the top middle screw and slide the panel to the left.
15
Tighten the screw and rethread the remaining screws to secure the panel.
16
If you prefer, you can reinstall the panel plugs.
17
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
03:36
Part Replacement
Whirlpool Alpha Front-Load Washer Drain Pump Replacement #WPW10425238
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com