Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front-Load Washer Replace Control Board #WPW10735683
Whirlpool Front-Load Washer Replace Control Board #WPW10735683
Skill Level
Total Parts Cost
$260.41Estimated Savings
$112.5002:56
- Description
This video provides step-by-step repair instructions for replacing the main control board on a Whirlpool front-load washer. The most common reason for replacing the control board is if the washer won’t start.
This control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver
This control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver
Step By Step Instructions
1
Before you replace the washer control board be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Release the control board locking tab and pull the assembly back to detach it from the side panel.
5
Release the wire covers and note the orientation of the wires connected to the board.
6
Disconnect the wires and remove the old board.
7
Install the new control board by first connecting all of the wires to the appropriate terminals.
8
Close the wire covers.
9
Align the assembly on the side panel and slide it forward to lock it in place.
10
Realign the top panel and slide it into position.
11
Secure the screws.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the main control board on a Whirlpool front-load washer. The most common reason for replacing the control board is if the washer won’t start.
This control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver
This control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver
Step-By-Step Instructions
1
Before you replace the washer control board be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Release the control board locking tab and pull the assembly back to detach it from the side panel.
5
Release the wire covers and note the orientation of the wires connected to the board.
6
Disconnect the wires and remove the old board.
7
Install the new control board by first connecting all of the wires to the appropriate terminals.
8
Close the wire covers.
9
Align the assembly on the side panel and slide it forward to lock it in place.
10
Realign the top panel and slide it into position.
11
Secure the screws.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Recommended Tools and Accessories
Cleaner
$7.62
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com