Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front-Load Washer Pressure Switch #WPW10448876
Whirlpool Front-Load Washer Pressure Switch #WPW10448876
Skill Level
Total Parts Cost
$49.50Estimated Savings
$112.5001:53
- Description
This video provides step-by-step repair instructions for replacing the pressure switch on a Whirlpool front-load washer. The most common reason for replacing the pressure switch is if the washer overflows.
This pressure switch replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver
This pressure switch replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver
Step By Step Instructions
1
Before you replace the pressure switch in your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Lift up the release tab to disconnect the pressure switch wire connecter.
5
Lift and rotate the old switch to detach it from the side panel And pull the switch free of the pressure tube.
6
Install the new pressure switch by first attaching the tube.
7
Now insert the switch into the slot in the side panel and rotate to secure.
8
Connect the wire connecter.
9
Realign the top panel and slide it into position.
10
Secure the screws.
11
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the pressure switch on a Whirlpool front-load washer. The most common reason for replacing the pressure switch is if the washer overflows.
This pressure switch replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver
This pressure switch replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver
Step-By-Step Instructions
1
Before you replace the pressure switch in your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Lift up the release tab to disconnect the pressure switch wire connecter.
5
Lift and rotate the old switch to detach it from the side panel And pull the switch free of the pressure tube.
6
Install the new pressure switch by first attaching the tube.
7
Now insert the switch into the slot in the side panel and rotate to secure.
8
Connect the wire connecter.
9
Realign the top panel and slide it into position.
10
Secure the screws.
11
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com