Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Alpha Front-Load Washer Pressure Switch Hose Replacement #WPW10525781
Whirlpool Alpha Front-Load Washer Pressure Switch Hose Replacement #WPW10525781
Skill Level
Total Parts Cost
$30.10Estimated Savings
$112.5003:45
- Description
This video provides step-by-step instructions for replacing the pressure switch h hose on a Whirlpool front loading washing machine, model #WFW85HEFW0. The most common reason for replacing the hose is if the washer will not fill properly.
All of the information in this pressure switch hose replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, 1/4" socket, T-20 Torx bit
All of the information in this pressure switch hose replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, 1/4" socket, T-20 Torx bit
Step By Step Instructions
1
Before you replace the pressure switch hose in your washer be sure to unplug the power cord.
2
Using a t-20 torx bit or a quarter-inch socket or nut driver, unthread the screws securing the rear access panel.
3
Loosen the center top screw, but don’t remove it.
4
Now slide the panel to the right to remove and set it aside.
5
Next, unthread the rear screws securing the top panel.
6
Slide the top panel back and lift up to remove.
7
Detach the pressure switch from the side panel and disconnect the hose.
8
Disconnect the opposite end of the hose from the air dome.
9
Release the hose from the upper retaining clip then cut the zip tie to release the old hose from the tub retaining clip.
10
Install the new pressure switch hose by attaching one end to the port on the air dome.
11
Secure the hose in the upper retaining clip and attach the opposite end to the pressure switch.
12
Reinstall the pressure switch on the side panel.
13
Use a new zip tie to secure the hose to the tub retaining clip.
14
Realign the top panel and slide it into position.
15
Replace the screws in the rear.
16
Hook the rear access panel on the top screw and slide it to the left.
17
Tighten the screw.
18
Rethread and tighten the remaining mounting screws.
19
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the pressure switch h hose on a Whirlpool front loading washing machine, model #WFW85HEFW0. The most common reason for replacing the hose is if the washer will not fill properly.
All of the information in this pressure switch hose replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, 1/4" socket, T-20 Torx bit
All of the information in this pressure switch hose replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, 1/4" socket, T-20 Torx bit
Step-By-Step Instructions
1
Before you replace the pressure switch hose in your washer be sure to unplug the power cord.
2
Using a t-20 torx bit or a quarter-inch socket or nut driver, unthread the screws securing the rear access panel.
3
Loosen the center top screw, but don’t remove it.
4
Now slide the panel to the right to remove and set it aside.
5
Next, unthread the rear screws securing the top panel.
6
Slide the top panel back and lift up to remove.
7
Detach the pressure switch from the side panel and disconnect the hose.
8
Disconnect the opposite end of the hose from the air dome.
9
Release the hose from the upper retaining clip then cut the zip tie to release the old hose from the tub retaining clip.
10
Install the new pressure switch hose by attaching one end to the port on the air dome.
11
Secure the hose in the upper retaining clip and attach the opposite end to the pressure switch.
12
Reinstall the pressure switch on the side panel.
13
Use a new zip tie to secure the hose to the tub retaining clip.
14
Realign the top panel and slide it into position.
15
Replace the screws in the rear.
16
Hook the rear access panel on the top screw and slide it to the left.
17
Tighten the screw.
18
Rethread and tighten the remaining mounting screws.
19
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
04:40
Part Replacement
Whirlpool Alpha Front-Load Washer Detergent Dispenser Replacement #W10575334
03:36
Part Replacement
Whirlpool Alpha Front-Load Washer Drain Pump Replacement #WPW10425238
04:00
Part Replacement
Whirlpool Alpha Front-Load Washer Control Board Replacement #W10920600
03:37
Part Replacement
Whirlpool Alpha Front-Load Washer Heating Element Replacement #W10576399
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com