Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Alpha Front-Load Washer Control Panel Replacement #W10903218
Whirlpool Alpha Front-Load Washer Control Panel Replacement #W10903218
Skill Level
Total Parts Cost
$363.67Estimated Savings
$150.0004:00
- Description
This video provides step-by-step instructions for replacing the control panel on a Whirlpool front loading washing machine, model #WFW85HEFW0. The most common reason for replacing the control panel is if it is damaged.
All of the information in this control panel replacement video is applicable to the following brands: Whirlpool
Tools used: T-20 Torx bit
All of the information in this control panel replacement video is applicable to the following brands: Whirlpool
Tools used: T-20 Torx bit
Step By Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace the control panel on your washer…
6
…be sure to unplug the power cord.
7
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
8
Slide the top panel back and lift up to detach.
9
Next, pull the detergent dispenser drawer out and depress the retaining tab to fully detach.
10
Use a t-20 torx bit to unthread the dispenser housing screws.
11
Now unthread the two mounting screws securing the console to the frame.
12
Since the support brackets are sharp, we suggest placing towels over the brackets for protection.
13
Now release the tabs at the top and pull the console forward to detach.
14
Using the quarter-inch socket or nut driver, unthread the screws securing the control panel.
15
Disconnect the control panel wire connecter to fully remove the old panel.
16
Install the new control panel…
17
…by aligning it in the console.
18
Secure it with the screws.
19
Connect the wire connecter to the new control panel.
20
Realign the console and snap it into place.
21
Thread and tighten the mounting screws.
22
Thread and tighten the dispenser housing screws as well.
23
Slide the detergent dispenser drawer back into place.
24
Realign the top panel and slide it into position.
25
Replace the screws in the rear.
26
With the repair completed…
27
…plug the power cord back in…
28
…and your washer should be ready for use.
29
At repairclinic – we make fixing things easy.
30
Thank you for supporting the production of these videos by purchasing your parts from our website.
Description
This video provides step-by-step instructions for replacing the control panel on a Whirlpool front loading washing machine, model #WFW85HEFW0. The most common reason for replacing the control panel is if it is damaged.
All of the information in this control panel replacement video is applicable to the following brands: Whirlpool
Tools used: T-20 Torx bit
All of the information in this control panel replacement video is applicable to the following brands: Whirlpool
Tools used: T-20 Torx bit
Step-By-Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace the control panel on your washer…
6
…be sure to unplug the power cord.
7
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
8
Slide the top panel back and lift up to detach.
9
Next, pull the detergent dispenser drawer out and depress the retaining tab to fully detach.
10
Use a t-20 torx bit to unthread the dispenser housing screws.
11
Now unthread the two mounting screws securing the console to the frame.
12
Since the support brackets are sharp, we suggest placing towels over the brackets for protection.
13
Now release the tabs at the top and pull the console forward to detach.
14
Using the quarter-inch socket or nut driver, unthread the screws securing the control panel.
15
Disconnect the control panel wire connecter to fully remove the old panel.
16
Install the new control panel…
17
…by aligning it in the console.
18
Secure it with the screws.
19
Connect the wire connecter to the new control panel.
20
Realign the console and snap it into place.
21
Thread and tighten the mounting screws.
22
Thread and tighten the dispenser housing screws as well.
23
Slide the detergent dispenser drawer back into place.
24
Realign the top panel and slide it into position.
25
Replace the screws in the rear.
26
With the repair completed…
27
…plug the power cord back in…
28
…and your washer should be ready for use.
29
At repairclinic – we make fixing things easy.
30
Thank you for supporting the production of these videos by purchasing your parts from our website.
Applicable Product Model
Total$0.00
Related Articles & Videos
04:40
Part Replacement
Whirlpool Alpha Front-Load Washer Detergent Dispenser Replacement #W10575334
03:36
Part Replacement
Whirlpool Alpha Front-Load Washer Drain Pump Replacement #WPW10425238
04:00
Part Replacement
Whirlpool Alpha Front-Load Washer Control Board Replacement #W10920600
03:37
Part Replacement
Whirlpool Alpha Front-Load Washer Heating Element Replacement #W10576399
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com