DescriptionThis video provides step-by-step instructions for replacing the outer door panel on a Whirlpool front loading washing machine, model #WFW85HEFW0. The most common reason for replacing the outer door panel is if it is damaged.
All of the information in this outer door panel replacement video is applicable to the following brands: Whirlpool
Tools used: T-25 Torx bit, T-15 Torx bit
Step-By-Step Instructions1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
To replace the outer door panel on your washer…
6
…use a t-25 torx bit to unthread the mounting screws securing the door hinge to the front panel.
7
Lift the door and hinge up to remove the door assembly…
8
…and set it on a towel or blanket.
9
Next, use a t-15 torx bit to unthread all of the screws holding the inner and outer door panels together.
10
With the screws unthreaded, you can separate the inner and outer door assemblies.
11
Install the new outer door panel…
12
…by aligning it with the inner panel assembly…
13
…then thread all of the screws.
14
Avoid over-tightening the screws.
15
Hook the door hinge back onto the front panel…
16
…then thread and tighten the mounting screws.
17
At repairclinic – we make fixing things easy.
18
Thank you for supporting the production of these videos by purchasing your parts from our website.