Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Washer Drive Belt Replacement #W10388414
Whirlpool Washer Drive Belt Replacement #W10388414
Skill Level
Total Parts Cost
$52.67Estimated Savings
$112.5001:40
- Description
This video provides step-by-step instructions for replacing the drive belt on Whirlpool front-load washing machines. The most common reasons for replacing the drive belt are when the washer is making loud noises, won’t drain, won’t spin, or won’t agitate.
All of the information in this drive belt replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Amana
Tools used: multi-screwdriver, nutdriver bit
All of the information in this drive belt replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Amana
Tools used: multi-screwdriver, nutdriver bit
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
And if installed, remove the four rear panel cabinet plugs by lifting and sliding them out.
3
Next, remove the mounting screws securing the rear panel and slide the panel down and out.
4
Now, rotate the tub drive pulley to help unthread the old drive belt and pull it free.
5
Install the new drive belt by hooking it onto the motor pulley.
6
Then, loop the belt onto the tub drive pulley while rotating the pulley to fully align the belt.
7
With the belt in place, slide the rear panel up into position and secure the mounting screws.
8
Snap in the cabinet plugs if available.
9
You're now ready to plug the appliance back in to make sure it's functioning properly.
Description
This video provides step-by-step instructions for replacing the drive belt on Whirlpool front-load washing machines. The most common reasons for replacing the drive belt are when the washer is making loud noises, won’t drain, won’t spin, or won’t agitate.
All of the information in this drive belt replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Amana
Tools used: multi-screwdriver, nutdriver bit
All of the information in this drive belt replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Amana
Tools used: multi-screwdriver, nutdriver bit
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
And if installed, remove the four rear panel cabinet plugs by lifting and sliding them out.
3
Next, remove the mounting screws securing the rear panel and slide the panel down and out.
4
Now, rotate the tub drive pulley to help unthread the old drive belt and pull it free.
5
Install the new drive belt by hooking it onto the motor pulley.
6
Then, loop the belt onto the tub drive pulley while rotating the pulley to fully align the belt.
7
With the belt in place, slide the rear panel up into position and secure the mounting screws.
8
Snap in the cabinet plugs if available.
9
You're now ready to plug the appliance back in to make sure it's functioning properly.
Applicable Product Model
Parts Needed
Drive Belt
$52.67
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com