Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Door Switch Replacement #WP9757262
KitchenAid Convection Gas Range Door Switch Replacement #WP9757262
Skill Level
Total Parts Cost
$76.78Estimated Savings
$112.5009:45
- Description
This video provides step-by-step repair instructions for replacing the door switch on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the switch is if the light in the oven will not work.
This door switch replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This door switch replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range Door Switch
3
You will need a phillips-head screwdriver to complete this task and an assistant to help move the oven.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Confirm that you can easily access the rear or the range then open the oven door and use a phillips-head screwdriver to unthread the screws securing the control panel's lower cover.
9
Sharp
10
Remove the cover.
11
Pull off the five control knobs.
12
Unthread the two screws securing the control panel to the frame.
13
Detach the control panel and support it to avoid straining the wires.
14
Unthread the front bracket screws securing the main top.
15
Heavy
16
Lift off both grates.
17
Remove all five burner caps and burner bases.
18
You can now unthread the screws securing the orfice holders to the main top.
19
Sharp
20
With the screws unthreaded, you can lift off the top.
21
Using the phillips-head screwdriver, unthread the two screws securing the lower rear access panel.
22
Sharp
23
Lift the panel up and out to remove.
24
Unthread the three screws to release the left side stop bracket.
25
Repeat to detrach the right side bracket.
26
Lift the upper rear access panel up to remove.
27
Unthread the two screws securing the orifice holder support panel to the right side panel.
28
Unthread the four remaining screws securing the side panel.
29
Use a flat-head screwdriver to depress the retaining tab at the rear and you can fully detach the panel.
30
Remove the insulating cover.
31
Disconnect the door switch wire connector.
32
Depress the retaining tabs and push the door switch free of the bracket.
33
Pull the actuator rod out of the hold in the front panel and detach the old switch from the rod.
34
Install the new oven door switch by hooking it onto the actuator rod.
35
Then feed the rod through the hole in the front panel and snap the switch into place on the bracket.
36
Connect the wire connector.
37
Reposition the insulating cover.
38
Reinstall the side panel by aligning the frame tabs with the slots on the front of the panel, then snap the panel into position.
39
Secure it with the screws.
40
Replace the screws securing the orifice holder support panel to the side panel.
41
Reinstall the upper rear access panel by hooking it on the tabs.
42
Realign the two stop brackets and thread the screws to hold them in place.
43
Reinstall the lower access panel by insert
44
Lower the panel and secure it with the screws.
45
Reposition the main top on the frame so the spark electrodes protrude through the holdes in the top.
46
Confirm that the orifice hodlers are aligned, the thread and tighten the screws to secure the holders to the main top.
47
Replace each burner base in its proper location by alighing the notch in the base with the spark electrode.
48
Replace the burner caps.
49
Reposition the grates.
50
Thread the two rear screws to secure the main top.
51
Replace the front bracket screws.
52
Realign the control panel on the front brackets.
53
Secure it with the screws.
54
Replace the lower cover, the thread the screws to secure.
55
Realign the control knobs on the valve stems and push them into place. Not ehtat the power burner control knob should be placed on the second stem from the left.
56
Turn the gas supply back on plug the power cord back in or retore the power supply and the gas rqange should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door switch on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the switch is if the light in the oven will not work.
This door switch replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This door switch replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range Door Switch
3
You will need a phillips-head screwdriver to complete this task and an assistant to help move the oven.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Confirm that you can easily access the rear or the range then open the oven door and use a phillips-head screwdriver to unthread the screws securing the control panel's lower cover.
9
Sharp
10
Remove the cover.
11
Pull off the five control knobs.
12
Unthread the two screws securing the control panel to the frame.
13
Detach the control panel and support it to avoid straining the wires.
14
Unthread the front bracket screws securing the main top.
15
Heavy
16
Lift off both grates.
17
Remove all five burner caps and burner bases.
18
You can now unthread the screws securing the orfice holders to the main top.
19
Sharp
20
With the screws unthreaded, you can lift off the top.
21
Using the phillips-head screwdriver, unthread the two screws securing the lower rear access panel.
22
Sharp
23
Lift the panel up and out to remove.
24
Unthread the three screws to release the left side stop bracket.
25
Repeat to detrach the right side bracket.
26
Lift the upper rear access panel up to remove.
27
Unthread the two screws securing the orifice holder support panel to the right side panel.
28
Unthread the four remaining screws securing the side panel.
29
Use a flat-head screwdriver to depress the retaining tab at the rear and you can fully detach the panel.
30
Remove the insulating cover.
31
Disconnect the door switch wire connector.
32
Depress the retaining tabs and push the door switch free of the bracket.
33
Pull the actuator rod out of the hold in the front panel and detach the old switch from the rod.
34
Install the new oven door switch by hooking it onto the actuator rod.
35
Then feed the rod through the hole in the front panel and snap the switch into place on the bracket.
36
Connect the wire connector.
37
Reposition the insulating cover.
38
Reinstall the side panel by aligning the frame tabs with the slots on the front of the panel, then snap the panel into position.
39
Secure it with the screws.
40
Replace the screws securing the orifice holder support panel to the side panel.
41
Reinstall the upper rear access panel by hooking it on the tabs.
42
Realign the two stop brackets and thread the screws to hold them in place.
43
Reinstall the lower access panel by insert
44
Lower the panel and secure it with the screws.
45
Reposition the main top on the frame so the spark electrodes protrude through the holdes in the top.
46
Confirm that the orifice hodlers are aligned, the thread and tighten the screws to secure the holders to the main top.
47
Replace each burner base in its proper location by alighing the notch in the base with the spark electrode.
48
Replace the burner caps.
49
Reposition the grates.
50
Thread the two rear screws to secure the main top.
51
Replace the front bracket screws.
52
Realign the control panel on the front brackets.
53
Secure it with the screws.
54
Replace the lower cover, the thread the screws to secure.
55
Realign the control knobs on the valve stems and push them into place. Not ehtat the power burner control knob should be placed on the second stem from the left.
56
Turn the gas supply back on plug the power cord back in or retore the power supply and the gas rqange should be ready for use.
Applicable Product Model
Related Articles & Videos
07:47
Part Replacement
Kitchenaid Electric Slide-In Range Door Switch Replacement #WP9757262
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com