Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Door Switch Replacement #WP9757262 
Whirlpool Gas Range Door Switch Replacement #WP9757262
Skill Level
Total Parts Cost
$76.78Estimated Savings
$112.5002:31
- Description
This video provides step-by-step repair instructions for replacing the door switch on a Whirlpool gas range. The most common reason for replacing this part is if the range will not work at all.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Oven Door Switch Replacement
3
Tools needed: Phillips-head screwdriver or a number two square drive bit
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Open the oven door.
8
Next, use a Phillips-head screwdriver or a number two square drive bit to unthread the screws securing the lower rear access panel.
9
Sharp
10
Lift the panel up and out.
11
Disconnect the door switch wire connecter.
12
Depress the retaining tabs and push the door switch free of the rear panel.
13
Pull the actuator rod out of the hole in the front panel and detach the old switch from the rod.
14
Install the new oven door switch by hooking it onto the actuator rod, then feed the rod through the hole in the front panel and snap the switch into place on the rear panel.
15
Connect the wire connecter.
16
Reinstall the lower rear access panel.
17
Thread the screws to secure.
18
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door switch on a Whirlpool gas range. The most common reason for replacing this part is if the range will not work at all.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Oven Door Switch Replacement
3
Tools needed: Phillips-head screwdriver or a number two square drive bit
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Open the oven door.
8
Next, use a Phillips-head screwdriver or a number two square drive bit to unthread the screws securing the lower rear access panel.
9
Sharp
10
Lift the panel up and out.
11
Disconnect the door switch wire connecter.
12
Depress the retaining tabs and push the door switch free of the rear panel.
13
Pull the actuator rod out of the hole in the front panel and detach the old switch from the rod.
14
Install the new oven door switch by hooking it onto the actuator rod, then feed the rod through the hole in the front panel and snap the switch into place on the rear panel.
15
Connect the wire connecter.
16
Reinstall the lower rear access panel.
17
Thread the screws to secure.
18
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
09:45
Part Replacement
KitchenAid Convection Gas Range Door Switch Replacement #WP9757262
07:47
Part Replacement
Kitchenaid Electric Slide-In Range Door Switch Replacement #WP9757262
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com