Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front Load Washer Flow Meter Replacement #W10110225
Whirlpool Front Load Washer Flow Meter Replacement #W10110225
Skill Level
Total Parts Cost
$77.94Estimated Savings
$112.5001:52
- Description
This video provides step-by-step instructions for replacing the flow meter on Whirlpool front-load washing machines. The most common reason for replacing the flow meter is when the control board is displaying an error code, which differs depending on the particular model.
All of the information in this flow meter replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, KitchenAid
Tools used: multi-screwdriver, nutdriver bit, wrench
All of the information in this flow meter replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, KitchenAid
Tools used: multi-screwdriver, nutdriver bit, wrench
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the top panel and pull the panel off.
3
Now, use pliers to release the clamps securing the hoses on either end of the flow meter and pull the hoses off.
4
Be prepared for some water to spill out.
5
Depress the tab to detach the wire harness and remove the old flow meter.
6
Install the new flow meter by first connecting the wire harness.
7
Next, attach the hoses to each end of the meter and secure the clamps.
8
Reposition the top panel and secure the screws.
9
You're now ready to plug the appliance back in to make sure it's functioning properly.
Description
This video provides step-by-step instructions for replacing the flow meter on Whirlpool front-load washing machines. The most common reason for replacing the flow meter is when the control board is displaying an error code, which differs depending on the particular model.
All of the information in this flow meter replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, KitchenAid
Tools used: multi-screwdriver, nutdriver bit, wrench
All of the information in this flow meter replacement video is applicable to the following brands: Whirlpool, Maytag, Kenmore, KitchenAid
Tools used: multi-screwdriver, nutdriver bit, wrench
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the top panel and pull the panel off.
3
Now, use pliers to release the clamps securing the hoses on either end of the flow meter and pull the hoses off.
4
Be prepared for some water to spill out.
5
Depress the tab to detach the wire harness and remove the old flow meter.
6
Install the new flow meter by first connecting the wire harness.
7
Next, attach the hoses to each end of the meter and secure the clamps.
8
Reposition the top panel and secure the screws.
9
You're now ready to plug the appliance back in to make sure it's functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com