DescriptionThis video provides step-by-step repair instructions for replacing the dryer timer on a Whirlpool electric washer/dryer combo (model #WET4027EW0). The most common reason for replacing this part is if the dryer will not work.
This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions1
Before you replace the dryer timer in your washer / dryer combo…
2
…be sure to unplug the power cord or shut off the power supply.
3
Use a 5/16th inch socket or nut driver to unthread the three screws securing the control panel assembly.
4
Detach the panel assembly.
5
Pull off the timer knob.
6
Note the orientation of the wires connected to the timer…then disconnect them.
7
Use a quarter-inch socket or nut driver to unthread the timer mounting screws.
8
Install the new dryer timer…
9
…by positioning it in the control panel then thread the mounting screws.
10
Connect the wires to the appropriate terminals.
11
Align the knob on the switch stem.
12
Realign the control panel assembly.
13
Rethread the three screws on top.
14
Plug the power cord back in or restore the power supply…
15
…and your washer/dryer combo should be ready for use.