Video & Articles: Appliance & Equipment RepairWhirlpool Electric Washer/Dryer Combo Soil Level Switch Replacement #WPW10544357

Whirlpool Electric Washer/Dryer Combo Soil Level Switch Replacement #WPW10544357

01:54
This video provides step-by-step repair instructions for replacing the soil level switch on a Whirlpool electric washer/dryer combo (model #WET4027EW0). The most common reason for replacing this part is if the washer is not cleaning properly.

This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid

Don't forget to like and comment on this video and subscribe to our channel!

Step By Step Instructions

1
Before you replace the three-position soil level switch in your washer / dryer combo…
2
…be sure to unplug the power cord or shut off the power supply.
3
Use a 5/16th inch socket or nut driver to unthread the three screws securing the control panel assembly.
4
Detach the panel assembly.
5
Pull off the soil level switch knob.
6
Depress the tab to release the wire connecter from the switch.
7
Now lift the arm and rotate the old switch to remove.
8
Install the new soil level switch…
9
…by positioning it in the control panel then rotate until the switch is fully seated.
10
Connect the wire connecter.
11
Align the knob on the switch stem.
12
Realign the control panel assembly.
13
Rethread the three screws on top.
14
Plug the power cord back in or restore the power supply…
15
…and your washer/dryer combo should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the soil level switch on a Whirlpool electric washer/dryer combo (model #WET4027EW0). The most common reason for replacing this part is if the washer is not cleaning properly.

This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid

Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Before you replace the three-position soil level switch in your washer / dryer combo…
2
…be sure to unplug the power cord or shut off the power supply.
3
Use a 5/16th inch socket or nut driver to unthread the three screws securing the control panel assembly.
4
Detach the panel assembly.
5
Pull off the soil level switch knob.
6
Depress the tab to release the wire connecter from the switch.
7
Now lift the arm and rotate the old switch to remove.
8
Install the new soil level switch…
9
…by positioning it in the control panel then rotate until the switch is fully seated.
10
Connect the wire connecter.
11
Align the knob on the switch stem.
12
Realign the control panel assembly.
13
Rethread the three screws on top.
14
Plug the power cord back in or restore the power supply…
15
…and your washer/dryer combo should be ready for use.

Applicable Product Model

Washer/Dryer Combo
Model
Subtype
Product Diagram & Manuals
Parts Needed
Total$0.00

Related Articles & Videos

05:07
Part Replacement
Whirlpool Electric Washer/Dryer Combo Lid Switch Assembly Replacement Part # WP3355458
08:48
Part Replacement
Whirlpool Electric Washer/Dryer Combo Dryer Drive Belt Replacement #661570V
04:26
Part Replacement
Whirlpool Electric Washer/Dryer Combo Heating Element Thermal Fuse Replacement #279769
05:56
Part Replacement
Whirlpool Electric Washer/Dryer Combo Water Inlet Valve Replacement #W10919200
03:57
Part Replacement
Whirlpool Electric Washer/Dryer Combo Heating Element Replacement #WP3387749