Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Electric Washer/Dryer Combo Start Switch Replacement #WP3404233 
Whirlpool Electric Washer/Dryer Combo Start Switch Replacement #WP3404233
Skill Level
Total Parts Cost
$54.24Estimated Savings
$112.5002:12
- Description
This video provides step-by-step repair instructions for replacing the start switch on a Whirlpool electric washer/dryer combo (model #WET4027EW0). The most common reason for replacing this part is if the appliance will not start.
This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the start switch knob. This may require some effort - You can use string or wire to help pry it off.
3
Next, remove the control panel’s back panel to access the switch itself.
4
Pull the tab and rotate the old switch counter-clockwise to release.
5
Disconnect the wires.
6
You’re now ready to install the new start switch.
7
Reattach the wires then insert the switch into the control panel and rotate clockwise until it snaps into position.
8
Replace the back panel and secure the screws.
9
Reinstall the start switch knob and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the start switch on a Whirlpool electric washer/dryer combo (model #WET4027EW0). The most common reason for replacing this part is if the appliance will not start.
This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the start switch knob. This may require some effort - You can use string or wire to help pry it off.
3
Next, remove the control panel’s back panel to access the switch itself.
4
Pull the tab and rotate the old switch counter-clockwise to release.
5
Disconnect the wires.
6
You’re now ready to install the new start switch.
7
Reattach the wires then insert the switch into the control panel and rotate clockwise until it snaps into position.
8
Replace the back panel and secure the screws.
9
Reinstall the start switch knob and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Start Switch
$54.24
Total$0.00
Related Articles & Videos
05:07
Part Replacement
Whirlpool Electric Washer/Dryer Combo Lid Switch Assembly Replacement Part # WP3355458
08:48
Part Replacement
Whirlpool Electric Washer/Dryer Combo Dryer Drive Belt Replacement #661570V
04:26
Part Replacement
Whirlpool Electric Washer/Dryer Combo Heating Element Thermal Fuse Replacement #279769
05:56
Part Replacement
Whirlpool Electric Washer/Dryer Combo Water Inlet Valve Replacement #W10919200
03:57
Part Replacement
Whirlpool Electric Washer/Dryer Combo Heating Element Replacement #WP3387749
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com