Tappan Range/Stove/Oven Parts

Surface element control switch for the small surface element

Oven temperature sensor *May require cutting and splicing wire connector from old sensor onto new sensor with porcelain wire nuts

Range/stove surface element (6-inch). If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

Electronic oven control board. Also known as electronic clock control. Displays the time of day and controls the oven bake, broil functions.

Oven control board. If the oven does not heat check if the oven igniter is glowing. If so, the board is likely good and the oven igniter is weak and will need to be replaced. If it is not glowing the igniter and gas valve can be tested. If they test ok, then the board is likely the problem.

Drip pan, 6 inches, black

8" porcelain drip pan

Glide,drawer, front

Oven temperature sensor

Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.

Burner head screw

Radiant surface element, 9-inch 2500 Watt

Lens-light/lamp,indicator

Radiant surface element, 6-inch 1200 Watts

Dual surface element, 9 inches/ 6 inches. 1200/1300 Watt