Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSkuttle Humidifier Transformer Replacement #000-0814-008
Skuttle Humidifier Transformer Replacement #000-0814-008
Skill Level
Total Parts Cost
$23.60Estimated Savings
$112.5002:12
- Description
This video provides step-by-step repair instructions for replacing the transformer on a Skuttle humidifier. The most common reason for replacing the transformer is when it is blown.
All of the information for this humidifier transformer replacement video is applicable to the following brands:
Skuttle
All of the information for this humidifier transformer replacement video is applicable to the following brands:
Skuttle
Step By Step Instructions
1
To replace the humidifier transformer first turn off the power to the furnace.
2
Next, rotate the knobs securing the blower chamber panel on the furnace and pull the panel off.
3
Now loosen the screws to release the low voltage wires from the transformer.
4
Remove the wire nuts to disconnect the high voltage wires
5
Use a flathead screwdriver to help remove the strain relief nut then pull the old transformer out of the mounting plate.
6
Install the new transformer by inserting the wires and strain relief through the hole in the mounting plate.
7
Secure the transformer by threading and tightening the strain relief nut.
8
Matching the colors, connect the two pairs of wires using the wire nuts.
9
Attach the low voltage wires to the new transformer and tighten the screws to secure.
10
Reposition the blower chamber panel and rotate the knobs to secure.
11
You’re now ready to restore power to the furnace and confirm that the humidifier is functioning properly.
Description
This video provides step-by-step repair instructions for replacing the transformer on a Skuttle humidifier. The most common reason for replacing the transformer is when it is blown.
All of the information for this humidifier transformer replacement video is applicable to the following brands:
Skuttle
All of the information for this humidifier transformer replacement video is applicable to the following brands:
Skuttle
Step-By-Step Instructions
1
To replace the humidifier transformer first turn off the power to the furnace.
2
Next, rotate the knobs securing the blower chamber panel on the furnace and pull the panel off.
3
Now loosen the screws to release the low voltage wires from the transformer.
4
Remove the wire nuts to disconnect the high voltage wires
5
Use a flathead screwdriver to help remove the strain relief nut then pull the old transformer out of the mounting plate.
6
Install the new transformer by inserting the wires and strain relief through the hole in the mounting plate.
7
Secure the transformer by threading and tightening the strain relief nut.
8
Matching the colors, connect the two pairs of wires using the wire nuts.
9
Attach the low voltage wires to the new transformer and tighten the screws to secure.
10
Reposition the blower chamber panel and rotate the knobs to secure.
11
You’re now ready to restore power to the furnace and confirm that the humidifier is functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com