Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Hedge Trimmer On-Off Switch Replacement #16340003460
Echo Hedge Trimmer On-Off Switch Replacement #16340003460
Skill Level
Total Parts Cost
$12.36Estimated Savings
$112.5001:57
- Description
This video provides step-by-step repair instructions for replacing the on-off switch on an Echo hedge trimmer. The most common reason for replacing the on-off switch is if the hedge trimmer will not turn on or off properly.
All of the information in this on-off switch replacement video is applicable to the following brands: Echo
Tools used: 14mm wrench, flat-head screwdriver
All of the information in this on-off switch replacement video is applicable to the following brands: Echo
Tools used: 14mm wrench, flat-head screwdriver
Step By Step Instructions
1
Before you replace the on-off switch on your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 14mm wrench to unthread the nut securing the on-off switch.
4
Now use a flat-head screwdriver to depress the retaining tab to release the handle cover.
5
Fully remove the cover.
6
Disconnect the old on-off switch from the wire.
7
Install the new on-off switch by connecting it to the wire.
8
Align the eyelet terminal over the on-off switch position the handle cover then insert the switch through the hole in the cover and snap the cover into place.
9
Thread the nut to secure the switch.
10
With the repair completed reattach the wire and boot to the spark plug and your hedge trimmer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the on-off switch on an Echo hedge trimmer. The most common reason for replacing the on-off switch is if the hedge trimmer will not turn on or off properly.
All of the information in this on-off switch replacement video is applicable to the following brands: Echo
Tools used: 14mm wrench, flat-head screwdriver
All of the information in this on-off switch replacement video is applicable to the following brands: Echo
Tools used: 14mm wrench, flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the on-off switch on your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 14mm wrench to unthread the nut securing the on-off switch.
4
Now use a flat-head screwdriver to depress the retaining tab to release the handle cover.
5
Fully remove the cover.
6
Disconnect the old on-off switch from the wire.
7
Install the new on-off switch by connecting it to the wire.
8
Align the eyelet terminal over the on-off switch position the handle cover then insert the switch through the hole in the cover and snap the cover into place.
9
Thread the nut to secure the switch.
10
With the repair completed reattach the wire and boot to the spark plug and your hedge trimmer should be ready for use.
Applicable Product Model
Parts Needed
On - Off Switch
$12.36
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com