Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Hedge Trimmer Fuel Tank Replacement #A350000680
Echo Hedge Trimmer Fuel Tank Replacement #A350000680
Skill Level
Total Parts Cost
$26.92Estimated Savings
$112.5002:44
- Description
This video provides step-by-step repair instructions for replacing the fuel tank on an Echo hedge trimmer. The most common reasons for replacing the fuel tank are if the tank is damaged or leaking.
All of the information in this fuel tank replacement video is applicable to the following brands: Echo
Tools used: T-27 Torx bit
All of the information in this fuel tank replacement video is applicable to the following brands: Echo
Tools used: T-27 Torx bit
Step By Step Instructions
1
Before you replace the fuel tank your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Make sure the fuel tank is empty as well.
4
Note the orientation of the primer return and intake hoses then disconnect them from the carburetor.
5
Next, use a t-27 torx bit to unthread the fuel tank mounting screws and remove the old tank.
6
Prepare the new fuel tank for installation by transferring the cap and retainer from the old tank to the new one as well as the fuel system assembly.
7
You can apply a small amount of oil to the grommet to make the installation easier.
8
Now insert the tab on the bottom of the new tank into the rubber mount and align the screw holes.
9
With the washers in place on the mounting screws, thread and tighten the screws to secure the tank.
10
Connect the intake and primer return hoses to the appropriate ports on the carburetor.
11
Reattach the wire and boot to the spark plug fill the new tank with fuel and your hedge trimmer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the fuel tank on an Echo hedge trimmer. The most common reasons for replacing the fuel tank are if the tank is damaged or leaking.
All of the information in this fuel tank replacement video is applicable to the following brands: Echo
Tools used: T-27 Torx bit
All of the information in this fuel tank replacement video is applicable to the following brands: Echo
Tools used: T-27 Torx bit
Step-By-Step Instructions
1
Before you replace the fuel tank your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Make sure the fuel tank is empty as well.
4
Note the orientation of the primer return and intake hoses then disconnect them from the carburetor.
5
Next, use a t-27 torx bit to unthread the fuel tank mounting screws and remove the old tank.
6
Prepare the new fuel tank for installation by transferring the cap and retainer from the old tank to the new one as well as the fuel system assembly.
7
You can apply a small amount of oil to the grommet to make the installation easier.
8
Now insert the tab on the bottom of the new tank into the rubber mount and align the screw holes.
9
With the washers in place on the mounting screws, thread and tighten the screws to secure the tank.
10
Connect the intake and primer return hoses to the appropriate ports on the carburetor.
11
Reattach the wire and boot to the spark plug fill the new tank with fuel and your hedge trimmer should be ready for use.
Applicable Product Model
Parts Needed
Fuel Tank
$26.92
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com