Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Hedge Trimmer Recoil Starter Assembly #A051002590
Echo Hedge Trimmer Recoil Starter Assembly #A051002590
Skill Level
Total Parts Cost
$86.28Estimated Savings
$112.5002:06
- Description
This video provides step-by-step repair instructions for replacing the recoil starter on an Echo hedge trimmer. The most common reasons for replacing the starter are if the rope is broken, the rope will not rewind, or the engine will not turn over when the rope is pulled.
All of the information in this recoil starter replacement video is applicable to the following brands: Echo
Tools used: T-27 Torx bit
All of the information in this recoil starter replacement video is applicable to the following brands: Echo
Tools used: T-27 Torx bit
Step By Step Instructions
1
Before you replace the recoil starter assembly on your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
To reduce the chance of injury, we recommend keeping the blade cover on for this procedure.
4
Use a t-27 torx bit to unthread the screws to release the old recoil starter and housing.
5
Install the new recoil starter assembly by aligning the housing on the lower housing then thread and tighten the screws to secure.
6
The screws with the larger threads go in the bottom.
7
With the repair completed reattach the wire and boot to the spark plug and your hedge trimmer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the recoil starter on an Echo hedge trimmer. The most common reasons for replacing the starter are if the rope is broken, the rope will not rewind, or the engine will not turn over when the rope is pulled.
All of the information in this recoil starter replacement video is applicable to the following brands: Echo
Tools used: T-27 Torx bit
All of the information in this recoil starter replacement video is applicable to the following brands: Echo
Tools used: T-27 Torx bit
Step-By-Step Instructions
1
Before you replace the recoil starter assembly on your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
To reduce the chance of injury, we recommend keeping the blade cover on for this procedure.
4
Use a t-27 torx bit to unthread the screws to release the old recoil starter and housing.
5
Install the new recoil starter assembly by aligning the housing on the lower housing then thread and tighten the screws to secure.
6
The screws with the larger threads go in the bottom.
7
With the repair completed reattach the wire and boot to the spark plug and your hedge trimmer should be ready for use.
Applicable Product Model
Parts Needed
Recoil Starter
$86.28
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com