Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Hedge Trimmer Fuel Filter Line Replacement #V471003660
Echo Hedge Trimmer Fuel Filter Line Replacement #V471003660
Skill Level
Total Parts Cost
$1.76Estimated Savings
$112.5003:33
- Description
This video provides step-by-step repair instructions for replacing the fuel filter line on an Echo hedge trimmer. The most common reasons for replacing the fuel line are if it is leaking or the trimmer is running poorly.
All of the information in this fuel filter line replacement video is applicable to the following brands: Echo
Tools used: flat head screwdriver
All of the information in this fuel filter line replacement video is applicable to the following brands: Echo
Tools used: flat head screwdriver
Step By Step Instructions
1
Before you replace the fuel filter line on your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We also recommend emptying the fuel tank.
4
Unthread the knob to detach the air filter housing.
5
Next, unthread the fuel tank cap and remove the retainer.
6
Note the orientation of the primer return and intake hoses then disconnect them from the carburetor.
7
Use a flat-head screwdriver to push the grommet into the tank then use a wire with a hook to remove the fuel system assembly from the fill spout.
8
Release the retaining spring and pull off the fuel filter – set the spring aside.
9
Release the retaining spring securing the fuel line to the connecter and pull the old line off of the connecter.
10
Install the new fuel filter line by first sliding the retaining springs over each end.
11
Attach one end to the connecter and secure it with the spring.
12
Attach the fuel filter to the opposite end and secure the spring.
13
Apply a small amount of oil to the grommet then insert the fuel filter into the tank and push the grommet into place.
14
Connect the intake and primer return hoses to the appropriate ports on the carburetor.
15
Insert the retainer into the tank and thread on the cap.
16
Reposition the air filter housing and thread the knob to secure.
17
Reattach the wire and boot to the spark plug refill the fuel tank and your hedge trimmer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the fuel filter line on an Echo hedge trimmer. The most common reasons for replacing the fuel line are if it is leaking or the trimmer is running poorly.
All of the information in this fuel filter line replacement video is applicable to the following brands: Echo
Tools used: flat head screwdriver
All of the information in this fuel filter line replacement video is applicable to the following brands: Echo
Tools used: flat head screwdriver
Step-By-Step Instructions
1
Before you replace the fuel filter line on your hedge trimmer make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
We also recommend emptying the fuel tank.
4
Unthread the knob to detach the air filter housing.
5
Next, unthread the fuel tank cap and remove the retainer.
6
Note the orientation of the primer return and intake hoses then disconnect them from the carburetor.
7
Use a flat-head screwdriver to push the grommet into the tank then use a wire with a hook to remove the fuel system assembly from the fill spout.
8
Release the retaining spring and pull off the fuel filter – set the spring aside.
9
Release the retaining spring securing the fuel line to the connecter and pull the old line off of the connecter.
10
Install the new fuel filter line by first sliding the retaining springs over each end.
11
Attach one end to the connecter and secure it with the spring.
12
Attach the fuel filter to the opposite end and secure the spring.
13
Apply a small amount of oil to the grommet then insert the fuel filter into the tank and push the grommet into place.
14
Connect the intake and primer return hoses to the appropriate ports on the carburetor.
15
Insert the retainer into the tank and thread on the cap.
16
Reposition the air filter housing and thread the knob to secure.
17
Reattach the wire and boot to the spark plug refill the fuel tank and your hedge trimmer should be ready for use.
Applicable Product Model
Parts Needed
Fuel Line
$1.76
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com