Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front-Load Washer Outer Boot Clamp #WPW10237503
Whirlpool Front-Load Washer Outer Boot Clamp #WPW10237503
Skill Level
Total Parts Cost
$30.10Estimated Savings
$112.5001:43
- Description
This video provides step-by-step repair instructions for replacing the outer boot clamp (or bellow retainer) on a Whirlpool front-load washer. The most common reason for replacing the outer boot clamp is if it is damaged or broken.
This outer boot clamp replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: needle-nose pliers
This outer boot clamp replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: needle-nose pliers
Step By Step Instructions
1
Before you replace the outer boot clamp on your washer be sure to unplug the power cord.
2
Open the washer door and use needle-nose pliers to remove the old clamp if still intact.
3
Before you install the new outer boot clamp confirm that the door boot seal is fully aligned on the lip of the front panel.
4
Now align the new clamp in the groove of the seal.
5
Securing the clamp near the top will make this easier.
6
With the repair completed. plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the outer boot clamp (or bellow retainer) on a Whirlpool front-load washer. The most common reason for replacing the outer boot clamp is if it is damaged or broken.
This outer boot clamp replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: needle-nose pliers
This outer boot clamp replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: needle-nose pliers
Step-By-Step Instructions
1
Before you replace the outer boot clamp on your washer be sure to unplug the power cord.
2
Open the washer door and use needle-nose pliers to remove the old clamp if still intact.
3
Before you install the new outer boot clamp confirm that the door boot seal is fully aligned on the lip of the front panel.
4
Now align the new clamp in the groove of the seal.
5
Securing the clamp near the top will make this easier.
6
With the repair completed. plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com