Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Washer Detergent Dispenser Hose #WPW10239966
Whirlpool Washer Detergent Dispenser Hose #WPW10239966
Skill Level
Total Parts Cost
$62.43Estimated Savings
$112.5002:39
- Description
This video provides step-by-step repair instructions for replacing the detergent dispenser outlet hose on a Whirlpool front-load washer. The most common reason for replacing the detergent dispenser outlet hose is if it is leaking.
This detergent dispenser outlet hose replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: needle-nose pliers
This detergent dispenser outlet hose replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: needle-nose pliers
Step By Step Instructions
1
Before you replace the detergent dispenser outlet hose in your washer be sure to unplug the power cord.
2
Open the washer door and use needle-nose pliers to remove the outer clamp securing the door boot seal.
3
Pull the seal off the lip of the front panel.
4
Detach the dispenser outlet hose from the seal.
5
Release the clamp to fully detach the old outlet hose from the dispenser.
6
You’re now ready to install the new detergent dispenser outlet hose.
7
Attach the hose to the dispenser and secure it with the clamp.
8
Insert the opposite end of the hose into the door boot seal.
9
Realign the door boot seal on the lip of the front panel.
10
Replace the outer boot clamp. Securing the clamp near the top will make this easier.
11
With the repair completed. plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the detergent dispenser outlet hose on a Whirlpool front-load washer. The most common reason for replacing the detergent dispenser outlet hose is if it is leaking.
This detergent dispenser outlet hose replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: needle-nose pliers
This detergent dispenser outlet hose replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: needle-nose pliers
Step-By-Step Instructions
1
Before you replace the detergent dispenser outlet hose in your washer be sure to unplug the power cord.
2
Open the washer door and use needle-nose pliers to remove the outer clamp securing the door boot seal.
3
Pull the seal off the lip of the front panel.
4
Detach the dispenser outlet hose from the seal.
5
Release the clamp to fully detach the old outlet hose from the dispenser.
6
You’re now ready to install the new detergent dispenser outlet hose.
7
Attach the hose to the dispenser and secure it with the clamp.
8
Insert the opposite end of the hose into the door boot seal.
9
Realign the door boot seal on the lip of the front panel.
10
Replace the outer boot clamp. Securing the clamp near the top will make this easier.
11
With the repair completed. plug the power cord back in and your washer should be ready for use.
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com