Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front-Load Washer Replaced Noise Filter #WPW10367632
Whirlpool Front-Load Washer Replaced Noise Filter #WPW10367632
Skill Level
Total Parts Cost
$60.51Estimated Savings
$112.5002:11
- Description
This video provides step-by-step repair instructions for replacing the noise filter on a Whirlpool front-load washer. The most common reason for replacing the noise filter is if the washer won’t start.
This noise filter replacement video is applicable to the following brands:
Whirlpool, Maytag, Amana, Inglis, Kenmore, KitchenAid
Tools needed: quarter-inch socket or nut driver
This noise filter replacement video is applicable to the following brands:
Whirlpool, Maytag, Amana, Inglis, Kenmore, KitchenAid
Tools needed: quarter-inch socket or nut driver
Step By Step Instructions
1
Before you replace the noise filter in your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Note the orientation of the wires connected to the noise filter then disconnect them.
5
Unthread the noise filter mounting screws.
6
Slide the old filter forward to release it from the support brace.
7
Install the new noise filter by hooking the tabs onto the support brace then rethread the mounting screws to secure.
8
Connect the wires to the appropriate terminals.
9
Realign the top panel and slide it into position.
10
Secure the screws.
11
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the noise filter on a Whirlpool front-load washer. The most common reason for replacing the noise filter is if the washer won’t start.
This noise filter replacement video is applicable to the following brands:
Whirlpool, Maytag, Amana, Inglis, Kenmore, KitchenAid
Tools needed: quarter-inch socket or nut driver
This noise filter replacement video is applicable to the following brands:
Whirlpool, Maytag, Amana, Inglis, Kenmore, KitchenAid
Tools needed: quarter-inch socket or nut driver
Step-By-Step Instructions
1
Before you replace the noise filter in your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Note the orientation of the wires connected to the noise filter then disconnect them.
5
Unthread the noise filter mounting screws.
6
Slide the old filter forward to release it from the support brace.
7
Install the new noise filter by hooking the tabs onto the support brace then rethread the mounting screws to secure.
8
Connect the wires to the appropriate terminals.
9
Realign the top panel and slide it into position.
10
Secure the screws.
11
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com