Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front Load Washer Outer Door Panel #WPW10424942
Whirlpool Front Load Washer Outer Door Panel #WPW10424942
Skill Level
Total Parts Cost
$151.79Estimated Savings
$112.5002:33
- Description
This video provides step-by-step repair instructions for replacing the outer door panel on a Whirlpool front-load washer. The most common reason for replacing the outer door panel is if it is damaged.
This outer door panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: T-25 Torx bit, T-15 Torx bit
This outer door panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: T-25 Torx bit, T-15 Torx bit
Step By Step Instructions
1
Before you replace the outer door panel on your washer be sure to unplug the power cord.
2
Open the washer door and use a t-25 torx bit to unthread the screws securing the door hinge.
3
With the screws unthreaded, lift the door up to detach it from the front panel.
4
Using a t-15 torx bit, unthread the screws holding the inner and outer door panels together.
5
Separate the panels.
6
Install the new outer door panel by aligning it with the inner panel.
7
Thread the screws to secure.
8
Insert the door hinge tabs into the front panel slots.
9
Rethread the screws to secure.
10
With the repair completed. plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the outer door panel on a Whirlpool front-load washer. The most common reason for replacing the outer door panel is if it is damaged.
This outer door panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: T-25 Torx bit, T-15 Torx bit
This outer door panel replacement video is applicable to the following brands:
Whirlpool
Tools needed: T-25 Torx bit, T-15 Torx bit
Step-By-Step Instructions
1
Before you replace the outer door panel on your washer be sure to unplug the power cord.
2
Open the washer door and use a t-25 torx bit to unthread the screws securing the door hinge.
3
With the screws unthreaded, lift the door up to detach it from the front panel.
4
Using a t-15 torx bit, unthread the screws holding the inner and outer door panels together.
5
Separate the panels.
6
Install the new outer door panel by aligning it with the inner panel.
7
Thread the screws to secure.
8
Insert the door hinge tabs into the front panel slots.
9
Rethread the screws to secure.
10
With the repair completed. plug the power cord back in and your washer should be ready for use.
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com