Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front-Load Washer Vent Hose Replacement #WPW10568614
Whirlpool Front-Load Washer Vent Hose Replacement #WPW10568614
Skill Level
Total Parts Cost
$55.29Estimated Savings
$112.5002:23
- Description
This video provides step-by-step repair instructions for replacing the vent hose on a Whirlpool front-load washer. The most common reason for replacing the vent hose is if it is damaged.
This vent hose replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, pliers
This vent hose replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, pliers
Step By Step Instructions
1
Before you replace the washer vent hose be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Use pliers to release the clamps securing the vent hose to the outer tub and the vent port.
5
Pull the old hose off.
6
If you need to replace the collar as well, use pliers to pull the old collar up then rotate counter-clockwise to detach it.
7
You’re now ready to install the new vent hose.
8
If necessary, insert the collar in the outer tub and rotate clockwise to lock it into place.
9
Align the curved end of the new hose on the collar and secure it with the clamp.
10
Attach the opposite end to the vent port.
11
Secure the clamp.
12
Realign the top panel and slide it into position.
13
Secure the screws.
14
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the vent hose on a Whirlpool front-load washer. The most common reason for replacing the vent hose is if it is damaged.
This vent hose replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, pliers
This vent hose replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, pliers
Step-By-Step Instructions
1
Before you replace the washer vent hose be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Use pliers to release the clamps securing the vent hose to the outer tub and the vent port.
5
Pull the old hose off.
6
If you need to replace the collar as well, use pliers to pull the old collar up then rotate counter-clockwise to detach it.
7
You’re now ready to install the new vent hose.
8
If necessary, insert the collar in the outer tub and rotate clockwise to lock it into place.
9
Align the curved end of the new hose on the collar and secure it with the clamp.
10
Attach the opposite end to the vent port.
11
Secure the clamp.
12
Realign the top panel and slide it into position.
13
Secure the screws.
14
With the repair completed plug the power cord back in and your washer should be ready for use.
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com