Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front Load Washer Internal Drain Hose #WPW10562025
Whirlpool Front Load Washer Internal Drain Hose #WPW10562025
Skill Level
Total Parts Cost
$48.45Estimated Savings
$112.5003:31
- Description
This video provides step-by-step repair instructions for replacing the internal drain hose on a Whirlpool front-load washer. The most common reason for replacing the drain hose is if the washer won’t drain.
This drain hose replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, pliers, flat-head screwdriver
This drain hose replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, pliers, flat-head screwdriver
Step By Step Instructions
1
Before you replace the internal drain hose in your washer be sure to unplug the power cord.
2
Remove the four rear access panel plugs if intact.
3
Use a quarter-inch socket or nut driver to unthread the screws securing the rear access panel.
4
The top middle screw does not need to be completely unthreaded.
5
Slide the panel to the right to fully detach.
6
Use pliers to release the clamp securing the internal drain hose to the pump and pull the hose off.
7
Detach the external drain hose.
8
Use a flat-head screwdriver to depress the retaining tab to detach the internal drain hose mounting connecter.
9
Release the old hose from the retaining brackets to fully remove.
10
Prepare the new internal drain hose for installation by transferring the clamp from the old hose to the new one.
11
Position the new hose in the cabinet and snap the mounting connecter into the support brace.
12
Secure the hose in the retaining brackets.
13
Attach the opposite end of the hose to the drain pump and secure it with the clamp.
14
Attach the external drain hose to the new mounting connecter and secure the clamp.
15
Realign the rear access panel on the top middle screw and slide the panel to the left.
16
Tighten the screw and rethread the remaining screws to secure the panel.
17
If you prefer, you can reinstall the panel plugs.
18
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the internal drain hose on a Whirlpool front-load washer. The most common reason for replacing the drain hose is if the washer won’t drain.
This drain hose replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, pliers, flat-head screwdriver
This drain hose replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, pliers, flat-head screwdriver
Step-By-Step Instructions
1
Before you replace the internal drain hose in your washer be sure to unplug the power cord.
2
Remove the four rear access panel plugs if intact.
3
Use a quarter-inch socket or nut driver to unthread the screws securing the rear access panel.
4
The top middle screw does not need to be completely unthreaded.
5
Slide the panel to the right to fully detach.
6
Use pliers to release the clamp securing the internal drain hose to the pump and pull the hose off.
7
Detach the external drain hose.
8
Use a flat-head screwdriver to depress the retaining tab to detach the internal drain hose mounting connecter.
9
Release the old hose from the retaining brackets to fully remove.
10
Prepare the new internal drain hose for installation by transferring the clamp from the old hose to the new one.
11
Position the new hose in the cabinet and snap the mounting connecter into the support brace.
12
Secure the hose in the retaining brackets.
13
Attach the opposite end of the hose to the drain pump and secure it with the clamp.
14
Attach the external drain hose to the new mounting connecter and secure the clamp.
15
Realign the rear access panel on the top middle screw and slide the panel to the left.
16
Tighten the screw and rethread the remaining screws to secure the panel.
17
If you prefer, you can reinstall the panel plugs.
18
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com