Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front-Load Washer Power Cord Replacement #W10632346
Whirlpool Front-Load Washer Power Cord Replacement #W10632346
Skill Level
Total Parts Cost
$69.94Estimated Savings
$112.5002:25
- Description
This video provides step-by-step repair instructions for replacing the power cord on a Whirlpool front-load washer. The most common reason for replacing the power cord is if the washer won’t start.
This power cord replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, 5/16th inch socket or nut driver, pliers
This power cord replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, 5/16th inch socket or nut driver, pliers
Step By Step Instructions
1
To replace the washer power cord unplug the old cord from the outlet.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Note the orientation of the power cord wires connected to the noise filter then disconnect them.
5
Use a 5/16th inch socket or nut driver to unthread the screw securing the grounding wire.
6
Now use pliers to rotate the strain relief to remove the old cord.
7
Install the new power cord by inserting the wires through the rear panel then rotate the strain relief to lock it into place.
8
Connect the wires to the appropriate terminals on the noise filter.
9
Rethread the screw to secure the grounding wire.
10
Realign the top panel and slide it into position.
11
Secure the screws.
12
With the repair completed plug the new power cord in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the power cord on a Whirlpool front-load washer. The most common reason for replacing the power cord is if the washer won’t start.
This power cord replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, 5/16th inch socket or nut driver, pliers
This power cord replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, 5/16th inch socket or nut driver, pliers
Step-By-Step Instructions
1
To replace the washer power cord unplug the old cord from the outlet.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Note the orientation of the power cord wires connected to the noise filter then disconnect them.
5
Use a 5/16th inch socket or nut driver to unthread the screw securing the grounding wire.
6
Now use pliers to rotate the strain relief to remove the old cord.
7
Install the new power cord by inserting the wires through the rear panel then rotate the strain relief to lock it into place.
8
Connect the wires to the appropriate terminals on the noise filter.
9
Rethread the screw to secure the grounding wire.
10
Realign the top panel and slide it into position.
11
Secure the screws.
12
With the repair completed plug the new power cord in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com