Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front Load Washer Control Panel Assembly WPW10750475
Whirlpool Front Load Washer Control Panel Assembly WPW10750475
Skill Level
Total Parts Cost
$385.58Estimated Savings
$112.5003:57
- Description
This video provides step-by-step repair instructions for replacing the control panel assembly on a Whirlpool front-load washer. The most common reason for replacing the control panel assembly is if the washer won’t start.
This control panel assembly replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, T-20 Torx bit, flat-head screwdriver, pliers
This control panel assembly replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, T-20 Torx bit, flat-head screwdriver, pliers
Step By Step Instructions
1
Before you replace the control panel assembly on your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Pull the detergent dispenser drawer out and depress the tab to release it.
5
Use a t-20 torx bit to unthread the screws in the dispenser housing.
6
Unthread the control panel housing mounting screws.
7
Lift up the tabs to detach the housing.
8
Disconnect the wire connecter and use a flat-head screwdriver and pliers to release the wire retainer.
9
Use the quarter-inch socket or nut driver to unthread the screws to release the old control panel assembly.
10
Prepare the new control panel assembly for installation by first peeling off the protective covering.
11
Align the new assembly on the control panel housing then thread the screws to secure.
12
Connect the wire connecter and snap in the wire retainer.
13
Insert the lower housing tabs into the slots in the front panel and snap the housing into place.
14
Rethread the mounting screws on top.
15
Replace the dispenser housing screws.
16
Slide the dispenser drawer into the housing.
17
Realign the top panel and slide it into position.
18
Secure the screws.
19
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the control panel assembly on a Whirlpool front-load washer. The most common reason for replacing the control panel assembly is if the washer won’t start.
This control panel assembly replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, T-20 Torx bit, flat-head screwdriver, pliers
This control panel assembly replacement video is applicable to the following brands:
Whirlpool
Tools needed: quarter-inch socket or nut driver, T-20 Torx bit, flat-head screwdriver, pliers
Step-By-Step Instructions
1
Before you replace the control panel assembly on your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Pull the detergent dispenser drawer out and depress the tab to release it.
5
Use a t-20 torx bit to unthread the screws in the dispenser housing.
6
Unthread the control panel housing mounting screws.
7
Lift up the tabs to detach the housing.
8
Disconnect the wire connecter and use a flat-head screwdriver and pliers to release the wire retainer.
9
Use the quarter-inch socket or nut driver to unthread the screws to release the old control panel assembly.
10
Prepare the new control panel assembly for installation by first peeling off the protective covering.
11
Align the new assembly on the control panel housing then thread the screws to secure.
12
Connect the wire connecter and snap in the wire retainer.
13
Insert the lower housing tabs into the slots in the front panel and snap the housing into place.
14
Rethread the mounting screws on top.
15
Replace the dispenser housing screws.
16
Slide the dispenser drawer into the housing.
17
Realign the top panel and slide it into position.
18
Secure the screws.
19
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Parts Needed
Touchpad and Control Panel
$385.58
Recommended Tools and Accessories
Cleaner
$7.62
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com