Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Microwave Oven/Hood Combo Cavity Lamp Cover Replacement #8206382 
Whirlpool Microwave Oven/Hood Combo Cavity Lamp Cover Replacement #8206382
Skill Level
Total Parts Cost
$6.01Estimated Savings
$112.5001:58
- Description
This video provides step-by-step repair instructions for replacing the cavity lamp cover on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Cavity Lamp Cover Replacement
3
Shock Hazard
4
Be sure to unplug the power cord or shut off the power supply.
5
Use a Phillips-head screwdriver to unthread the three screws securing the top grille.
6
Pull the grille down from the top to detach.
7
Remove the right side charcoal filter by lifting up the front and pulling it forward.
8
Heavy
9
You can now lift off the lamp cover.
10
Install the new cavity lamp cover by inserting the tab on the back of the cover into the slot in the frame then lower the cover.
11
Reinstall the charcoal filter by sliding it in over the tabs then push the front down to snap it into place.
12
Before you reinstall the top grille, make sure the two support clips are in place.
13
Now align the grille tabs with the slots in the frame and snap the grille into position.
14
Rethread the three screws.
15
Having a magnetized screwdriver will make it easier to rethread the screw on the right.
16
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the cavity lamp cover on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Cavity Lamp Cover Replacement
3
Shock Hazard
4
Be sure to unplug the power cord or shut off the power supply.
5
Use a Phillips-head screwdriver to unthread the three screws securing the top grille.
6
Pull the grille down from the top to detach.
7
Remove the right side charcoal filter by lifting up the front and pulling it forward.
8
Heavy
9
You can now lift off the lamp cover.
10
Install the new cavity lamp cover by inserting the tab on the back of the cover into the slot in the frame then lower the cover.
11
Reinstall the charcoal filter by sliding it in over the tabs then push the front down to snap it into place.
12
Before you reinstall the top grille, make sure the two support clips are in place.
13
Now align the grille tabs with the slots in the frame and snap the grille into position.
14
Rethread the three screws.
15
Having a magnetized screwdriver will make it easier to rethread the screw on the right.
16
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Cover
$6.01
Total$0.00
Related Articles & Videos
02:13
Part Replacement
Whirlpool Microwave Oven/Hood Combo Air Damper Installation W10843943
04:10
Part Replacement
Whirlpool Microwave Oven/Hood Combo Mounting Plate Replacement W11025649
02:58
Part Replacement
Whirlpool Microwave Oven/Hood Combo Control Board Assembly Replacement W10893407
02:37
Part Replacement
Whirlpool Microwave Oven/Hood Combo Line Fuse Replacement #W10138793
08:32
Part Replacement
Whirlpool Microwave Oven/Hood Combo Outer Door Glass Replacement WPW10478675
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com