Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Microwave Oven/Hood Combo Interlock Cam Plate Replacement W10562613 
Whirlpool Microwave Oven/Hood Combo Interlock Cam Plate Replacement W10562613
Skill Level
Total Parts Cost
$18.34Estimated Savings
$112.5003:50
- Description
This video provides step-by-step repair instructions for replacing the interlock cam plate on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if the door will not stay closed.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Interlock Cam Plate Replacement
3
Tools needed: Phillips-head screwdriver, T-10 Torx bit, flat-head screwdriver, needle-nose pliers
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Use a Phillips-head screwdriver to unthread the three screws securing the top grille.
7
Pull the grille down from the top to detach.
8
Next, unthread the screw securing the control board cover to the frame.
9
Lift the cover up to detach.
10
Disconnect the thermistor wire connecter to move the cover out of the way.
11
Depending on which cam plate you?re replacing, use a T-10 Torx bit to unthread the screw securing the upper or lower switch holder
12
Insert a flat-head screwdriver to fully release the latch to detach the holder.
13
Use needle-nose pliers to remove the interlock spring.
14
Carefully detach the switch or switches.
15
You can now remove the old cam plate if still intact.
16
Be aware, when installing a new interlock cam plate - you may need to replace the switch holder with a newer version for the plate to fit properly.
17
Now snap the switch or switches into the holder and position the interlock spring.
18
Align the holder assembly on the frame, then thread the screw to secure.
19
Flip the cam plate forward.
20
Reconnect the thermistor wire connecter to the control board.
21
Insert the control board cover tabs into the slots in the frame and thread the screw to secure.
22
Now align the grille tabs with the slots in the frame and snap the grille into position.
23
Rethread the three screws.
24
Having a magnetized screwdriver will make it easier to rethread the screw on the right.
25
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the interlock cam plate on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if the door will not stay closed.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Interlock Cam Plate Replacement
3
Tools needed: Phillips-head screwdriver, T-10 Torx bit, flat-head screwdriver, needle-nose pliers
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Use a Phillips-head screwdriver to unthread the three screws securing the top grille.
7
Pull the grille down from the top to detach.
8
Next, unthread the screw securing the control board cover to the frame.
9
Lift the cover up to detach.
10
Disconnect the thermistor wire connecter to move the cover out of the way.
11
Depending on which cam plate you?re replacing, use a T-10 Torx bit to unthread the screw securing the upper or lower switch holder
12
Insert a flat-head screwdriver to fully release the latch to detach the holder.
13
Use needle-nose pliers to remove the interlock spring.
14
Carefully detach the switch or switches.
15
You can now remove the old cam plate if still intact.
16
Be aware, when installing a new interlock cam plate - you may need to replace the switch holder with a newer version for the plate to fit properly.
17
Now snap the switch or switches into the holder and position the interlock spring.
18
Align the holder assembly on the frame, then thread the screw to secure.
19
Flip the cam plate forward.
20
Reconnect the thermistor wire connecter to the control board.
21
Insert the control board cover tabs into the slots in the frame and thread the screw to secure.
22
Now align the grille tabs with the slots in the frame and snap the grille into position.
23
Rethread the three screws.
24
Having a magnetized screwdriver will make it easier to rethread the screw on the right.
25
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Latch Actuator
$18.34
Total$0.00
Related Articles & Videos
02:13
Part Replacement
Whirlpool Microwave Oven/Hood Combo Air Damper Installation W10843943
04:10
Part Replacement
Whirlpool Microwave Oven/Hood Combo Mounting Plate Replacement W11025649
02:58
Part Replacement
Whirlpool Microwave Oven/Hood Combo Control Board Assembly Replacement W10893407
02:37
Part Replacement
Whirlpool Microwave Oven/Hood Combo Line Fuse Replacement #W10138793
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com