Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Microwave Oven/Hood Combo Display Board Replacement W10881549 
Whirlpool Microwave Oven/Hood Combo Display Board Replacement W10881549
Skill Level
Total Parts Cost
$194.01Estimated Savings
$112.5006:43
- Description
This video provides step-by-step repair instructions for replacing the display board on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if the display and/or buttons are not working properly.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Display Board Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Use a Phillips-head screwdriver to unthread the three screws securing the top grille.
7
Pull the grille down from the top to detach.
8
Disconnect the door wire connecter.
9
Use a small flat-head screwdriver to pry out the access plug.
10
Detach the door assembly mounting pins from the holes in the hinges to remove the assembly? and set it on a sturdy surface.
11
Next, pry out the plugs covering the four mounting screws holding the inner and outer door panels together.
12
Use a Phillips-head screwdriver to unthread the screws.
13
Now use a putty knife to help separate the outer door assembly from the inner panel.
14
Remove the window insert.
15
Unthread all of the screws securing the display board cover.
16
Lift up the cover and detach the wires from the clips on the cover.
17
Next, unthread the four mounting screws to release the display board.
18
Disconnect the harness connecter.
19
Release the ribbon from the connecter.
20
Install the new display board by first connecting the ribbon to the connecter.
21
Connect the harness connecter.
22
Position the display board and thread the mounting screws.
23
Secure the wires in the retaining clips on the display board cover.
24
Position the cover, then rethread all of the screws.
25
Reposition the window insert.
26
Realign the inner door panel and snap the two panels together.
27
Replace the four mounting screws.
28
Press the plugs into place.
29
Now align the door assembly on the hinges so the mounting pins insert into the holes in the hinges.
30
With the door in place, snap the access plug in.
31
Connect the door wire connecter.
32
Now align the grille tabs with the slots in the frame and snap the grille into position.
33
Rethread the three screws.
34
Having a magnetized screwdriver will make it easier to rethread the screw on the right.
35
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the display board on a Whirlpool microwave oven/hood combo (Model #WMH73521CS6). The most common reason for replacing this part is if the display and/or buttons are not working properly.
All of the information for this video is applicable to the following brands:
Whirlpool
All of the information for this video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Microwave Oven/Hood Combo - WMH73521CS6
2
Microwave Oven Display Board Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Use a Phillips-head screwdriver to unthread the three screws securing the top grille.
7
Pull the grille down from the top to detach.
8
Disconnect the door wire connecter.
9
Use a small flat-head screwdriver to pry out the access plug.
10
Detach the door assembly mounting pins from the holes in the hinges to remove the assembly? and set it on a sturdy surface.
11
Next, pry out the plugs covering the four mounting screws holding the inner and outer door panels together.
12
Use a Phillips-head screwdriver to unthread the screws.
13
Now use a putty knife to help separate the outer door assembly from the inner panel.
14
Remove the window insert.
15
Unthread all of the screws securing the display board cover.
16
Lift up the cover and detach the wires from the clips on the cover.
17
Next, unthread the four mounting screws to release the display board.
18
Disconnect the harness connecter.
19
Release the ribbon from the connecter.
20
Install the new display board by first connecting the ribbon to the connecter.
21
Connect the harness connecter.
22
Position the display board and thread the mounting screws.
23
Secure the wires in the retaining clips on the display board cover.
24
Position the cover, then rethread all of the screws.
25
Reposition the window insert.
26
Realign the inner door panel and snap the two panels together.
27
Replace the four mounting screws.
28
Press the plugs into place.
29
Now align the door assembly on the hinges so the mounting pins insert into the holes in the hinges.
30
With the door in place, snap the access plug in.
31
Connect the door wire connecter.
32
Now align the grille tabs with the slots in the frame and snap the grille into position.
33
Rethread the three screws.
34
Having a magnetized screwdriver will make it easier to rethread the screw on the right.
35
Plug the power cord back in or restore the power supply and the microwave oven should be ready for use.
Applicable Product Model
Parts Needed
Control Board
$194.01
Total$0.00
Related Articles & Videos
02:13
Part Replacement
Whirlpool Microwave Oven/Hood Combo Air Damper Installation W10843943
04:10
Part Replacement
Whirlpool Microwave Oven/Hood Combo Mounting Plate Replacement W11025649
02:58
Part Replacement
Whirlpool Microwave Oven/Hood Combo Control Board Assembly Replacement W10893407
02:37
Part Replacement
Whirlpool Microwave Oven/Hood Combo Line Fuse Replacement #W10138793
08:32
Part Replacement
Whirlpool Microwave Oven/Hood Combo Outer Door Glass Replacement WPW10478675
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com